Re: Running Hitec HPP-22 under wine. (RC device, USB)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2011-03-12 at 00:06 +0000, Martin Gregorie wrote:
> On Fri, 2011-03-11 at 12:57 -0700, Linuxguy123 wrote:
> > On Fri, 2011-03-11 at 19:49 +0000, Martin Gregorie wrote:
> > <snip >
> >  
> > > Does the dmesg display show what device name was assigned to the HPP-22
> > > somewhere in the next few lines? That's normally logged after a USB
> > > device is plugged and recognised. It may be easier to spot if you run
> > > the command "sudo tail -f /var/log/messages" before you plug the device
> > > in - this should let you see all the HPP-22 related messages as that are
> > > logged. Use Ctrl-C to exit from tail when you're done with it.
> > 
> > Thanks for replying.
> > 
> > That is the entire log for the plug in event.
> > 
> OK. That shows that the kernel saw the device being plugged in but
> didn't recognise what it was. In that case there is no driver defined
> for the HPP-22. To me it looks as though the HPPP-22 contains a USB hub
> and several connected USB devices but I could easily  be wrong. Check
> other threads about usblib etc. for similar threads and people who can
> advise on how to create or find a driver.
> 

Thanks !

I'll do that and report back.




[Index of Archives]     [Gimp for Windows]     [Red Hat]     [Samba]     [Yosemite Camping]     [Graphics Cards]     [Wine Home]

  Powered by Linux