>From my kernel log. But I don't see why it would be related to the driver or the port. As said the device works fine for native linux programs. My question is if there is any known bug in wine the prevents my from receiving bytes on a serial port, especially in the case of a usb serial port. If so, it there is any thing that I can do about this. I believe I am not the first to post about this problem. Ferry Sep 16 09:12:00 localhost kernel: [775687.696021] usb 3-2: new full speed USB device using uhci_hcd and address 5 Sep 16 09:12:00 localhost kernel: [775687.892136] usb 3-2: configuration #1 chosen from 1 choice Sep 16 09:12:00 localhost kernel: [775687.898159] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected Sep 16 09:12:00 localhost kernel: [775687.898189] usb 3-2: Detected FT2232C Sep 16 09:12:00 localhost kernel: [775687.898191] usb 3-2: Number of endpoints 2 Sep 16 09:12:00 localhost kernel: [775687.898193] usb 3-2: Endpoint 1 MaxPacketSize 64 Sep 16 09:12:00 localhost kernel: [775687.898195] usb 3-2: Endpoint 2 MaxPacketSize 64 Sep 16 09:12:00 localhost kernel: [775687.898197] usb 3-2: Setting MaxPacketSize 64 Sep 16 09:12:00 localhost kernel: [775687.899174] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0 Sep 16 09:12:00 localhost kernel: [775687.901321] ftdi_sio 3-2:1.1: FTDI USB Serial Device converter detected Sep 16 09:12:00 localhost kernel: [775687.901351] usb 3-2: Detected FT2232C Sep 16 09:12:00 localhost kernel: [775687.901353] usb 3-2: Number of endpoints 2 Sep 16 09:12:00 localhost kernel: [775687.901355] usb 3-2: Endpoint 1 MaxPacketSize 64 Sep 16 09:12:00 localhost kernel: [775687.901358] usb 3-2: Endpoint 2 MaxPacketSize 64 Sep 16 09:12:00 localhost kernel: [775687.901360] usb 3-2: Setting MaxPacketSize 64 Sep 16 09:12:00 localhost kernel: [775687.902185] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB1 Sep 16 09:12:09 localhost kernel: [775696.553040] usb 3-2: USB disconnect, address 5 Sep 16 09:12:09 localhost kernel: [775696.553236] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 Sep 16 09:12:09 localhost kernel: [775696.553253] ftdi_sio 3-2:1.0: device disconnected Sep 16 09:12:09 localhost kernel: [775696.553398] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 Sep 16 09:12:09 localhost kernel: [775696.553412] ftdi_sio 3-2:1.1: device disconnected -----Oorspronkelijke bericht----- Van: ael <law_ence.dev@xxxxxxxxxxxx> Aan: Ferry Toth <ftoth@xxxxxxxxxx> Cc: wine-users@xxxxxxxxxx Onderwerp: Re: USB Serial Port receives no data Datum: Thu, 16 Sep 2010 12:19:18 +0100 Nieuwsgroepen: gmane.comp.emulators.wine.user On Wed, Sep 15, 2010 at 11:00:54PM +0200, Ferry Toth wrote: > Hello, > > I have an application that sends data out to a serial port, then should > receive the reply. [..snip..] > > The PC runs ubuntu lucid. > The serial port is a usb dongle > udev correctly detects the dongle and creates 2 serial ports ttyUSB0 and > ttyUSB1 (yes this is correct behavior for the device). Which device & which driver? Actually, since the /dev/ttyUSB* are created, only the driver is perhaps of interest. Probably in /var/log/messages. ael -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.winehq.org/pipermail/wine-users/attachments/20100916/5ba1c2c3/attachment.htm>
