On Thu, Jan 22, 2009 at 01:07:25PM -0600, Andr? H. wrote: > try: > > https://iftools.com/download/wxterm/0.6/wxterm.exe > (open source) > > http://www.der-hammer.info/terminal/hterm.zip Thanks, Andre - I've just tried this out in both of the above, and I'm not seeing any data (although firing up 'gpsd' shows that it is indeed there.) What can I do to get it to show up? Again, to recap: I have a Garmin GPS that's connected to /dev/ttyUSB9 via the 'garmin_gps' module. I can see it fine in Linux; I can't see it with anything in Wine. I've created a symlink (~/.wine/dosdevices/com2 -> /dev/ttyUSB9) and added ---------------------------------------------------- [Hardware\\Devicemap\\Serialcomm] 1231984861 @="" "Serial0"="COM1" "Serial1"="COM2" "Serial2"="COM3" "Serial3"="COM4" "Serial4"="COM5" "Serial5"="COM6" "Serial6"="COM7" "Serial7"="COM8" "Serial8"="COM9" ---------------------------------------------------- to the registry (this was needed to make the ports show up at all in any of the software under Wine; without it, the only "port" was TCP/IP via Winsock.) What else can I do to make the data visible to software running under Wine? Thanks in advance, -- * Ben Okopnik * Editor-in-Chief, Linux Gazette * http://LinuxGazette.NET *
