EF wrote: > Hi > I was able to install AutoCAD 2008 with no patches successfully but I cannot get it to rum :? > > > Code: > fixme:heap:HeapSetInformation 0x1c30000 0 0x32f99c 4 > err:rpc:I_RpcGetBuffer no binding > fixme:advapi:RegisterEventSourceA ((null),"Autodesk SC"): stub > err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7bc368ef > err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7bc368ef > > > This is not all that you got on the terminal. Please create an issue and paste in the complete log. This appears to be a different issue than #421 as this involves the Mac. You might want to look at the issue and add your log to the existing issue if you are of the opinion that the issue is the same as your problem > I am running darwine 1.1.8 from http://www.kronenberg.org/darwine/ on OS X Leopard 10.5.5 > dotnet 2.0 mshtml3 corefonts gdiplus are installed > I don't think this is all that is needed to run AutoCad. > Xquartz is installed to replace Apple's X11 > > > Which version? If you are not using XQuartz 2.3.1, please install it. That is what Mike uses for his builds. Also, is there a downloadable test version of AutoCad 2008 (I doubt it, but it never hurts to ask.) James McKenzie > > > >
