hi! some time ago i have purchased card reader for scanning sim-card. it have usb inerface. in set was cd with soft (as usual only for windows) soft on cd: usb-driver installer sim max 5.16 & i try to run it on mandriva2008 kernel 2.6.22.9 first i try to install 'usb-driver installer.exe' then install sim max 5.16(it's 2 prog.: sim editor and sim scanner),but that's wrong way! i uninstall all. read man and i do next: $ dmesg : pl2303 4-2:1.0: pl2303 converter detected usb 4-2: pl2303 converter now attached to ttyUSB0 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver : well my card reader on chip pl2303 & kernel have pl2303 converter & 'usb-driver installer.exe'- don't need and pl2303 converter now attached to ttyUSB0 next i do it: ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 & install sim max 5.16 start sim editor -all right: sms,phone book -ok! but run sim scanner.well,main window open,press bottom scan & 'Connect failed.Please reinsert the SIM card and check if the reader is connected properly.' i'm in difficulties! do anybody solve a problem?
