You need to create a symbolic link from COM device to TTY like this: ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com2 This will create the symbolic link from COM2 to ttyUSB0. On Sunday July 29 2007 17:02, Briareos wrote: > Am Sonntag, 29. Juli 2007 16:58 schrieb Warren Dumortier: > > Without any logs iit is difficult to help you :p > > Here come some logs :) > > I've now done a link from tty9 to ttyUSB0. For your info here is the > dmesg-output from connecting the USB-cable (it's short so i provide it > inline): > > [17205091.904000] usb 1-1: new full speed USB device using uhci_hcd and > address 3 > [17205092.048000] cp2101 1-1:1.0: cp2101 converter detected > [17205092.160000] usb 1-1: reset full speed USB device using uhci_hcd and > address 3 > [17205092.296000] usb 1-1: cp2101 converter now attached to ttyUSB0 > > > I told the program to look only at COM9 for the device, but when it tries > to connect I get an error dialog: > "SetCommState function failed (win error code: 21)" > > In the console there is this: > fixme:comm:set_queue_size insize 1024 outsize 1024 unimplemented stub > err:comm:set_baud_rate tcgetattr error 'Input/output error' > > > Maybe these infos help progressing. As I said in the last message, I don't > know if the handling can or can't function (seeing it from > protocol-/hardwareside) if I just do a symlink to a different DEV-file > (COM->USB) ... > > _______________________________________________ > wine-users mailing list > wine-users@xxxxxxxxxx > http://www.winehq.org/mailman/listinfo/wine-users _______________________________________________ wine-users mailing list wine-users@xxxxxxxxxx http://www.winehq.org/mailman/listinfo/wine-users
