Hi All, I am trying to program my texas instruments MSP430 microcontroller via the paralell port. I have made a symlink from to /dev/lp0, and made sure everyboody can read and write to it: $ ls -l /dev/lp0 crwxrwxrwx 1 root lp 6, 0 2007-05-27 12:37 /dev/lp0 Next i have installed IAR embedded workbench using this installer: http://www-s.ti.com/sc/techzip/slac050.zip Installing goes without any error, and also running the program works great. I can debug my program in simulation mode without any problem. Next i change the options of the project, and choose the FET debugger, Texas instrument LPT-IF, and parallel port 1. Now i choose project-debug. Now i get the following pop-up message: "No device found or device disconnected. Please connect the device and press retry to reconnect, or press cancel to abort" In the console i get the following messages: $ wine /home/cedric/.wine/drive_c/Program\ Files/IAR\ Systems/Embedded\ Workbench\ 4.0/common/bin/IarIdePm.exe fixme:htmlhelp:HtmlHelpW HH case HH_INITIALIZE not handled. fixme:htmlhelp:HtmlHelpW HH case HH_CLOSE_ALL not handled. fixme:setupapi:SetupDiClassGuidsFromNameExA fixme:setupapi:SetupDiGetClassDevsW returning empty list fixme:setupapi:SetupDiEnumDeviceInfo 0x1d9b28 0 0x33f318 Now i click "retry". Now i get the following pop up message: "FATAL ERROR Failed to re-initalize Session aborted!" And in the console: fixme:setupapi:SetupDiClassGuidsFromNameExA fixme:setupapi:SetupDiGetClassDevsW returning empty list fixme:setupapi:SetupDiEnumDeviceInfo 0x1dd680 0 0x33f2b4 When i disconnect the microcontroller, i get the following errormessages after pressing project->debug: In the pop-up: "No device found or device disconnected. Please connect the device and press retry to reconnect, or press cancel to abort" In the console: fixme:setupapi:SetupDiClassGuidsFromNameExA fixme:setupapi:SetupDiGetClassDevsW returning empty list fixme:setupapi:SetupDiEnumDeviceInfo 0x1d71e0 0 0x33f318 After clikcing "retry" i see the folloinwing the pop-up: "FATAL ERROR Failed to re-initalize Session aborted!" And in the console: fixme:setupapi:SetupDiClassGuidsFromNameExA fixme:setupapi:SetupDiGetClassDevsW returning empty list fixme:setupapi:SetupDiEnumDeviceInfo 0x199090 0 0x33f2b4 My versions: IAR Embedded Workbench Kickstart Version 4.61 Kubuntu 7.04 wine-0.9.37 $ uname -a Linux athlon 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux Can somebody tell me what the above erros mean? Best regards, Cedric _______________________________________________ wine-users mailing list wine-users@xxxxxxxxxx http://www.winehq.org/mailman/listinfo/wine-users
