On Wed, Feb 23, 2005 at 12:44:59AM +0100, Sylvain Petreolle wrote: > > I gather that the first four lines are a complaint about the lack of > > MFC42.DLL. However: > > > > [ccurley@charlesc ~]$ locate MFC42.DLL > > /home/ccurley/.wine/drive_c/windows/system/MFC42.DLL > > These 4 lines are only saying some functions were not found in the MFC42.DLL you have installed > on your disk. > Some versions of this library are existing, > you could look on the installation disk to see if this file is not here. > > In this case you could remove the existing one in drive_c/windows/system/ and replace it. Thank you. There is indeed a suitable DLL on the product CD-ROM, at Util/PoiCutr/Mfc42.dll. I moved the old one aside and copied that one into place, and the extractor works. This helps with another problem. I mentioned in a separate email that the main SA 8.0 program has problems reading a CD-ROM image. It turns out that the Extractor does not. I had the CD-ROM door open when I ran the extractor, and it picked up data drom somewhere, possibly the program's cache. So I was able to build a cache for one state and some surrounding areas without the data CD-ROM. So the obvious workaround for the CD-ROM image problem is to use the extractor. Thanks again. -- Charles Curley /"\ ASCII Ribbon Campaign Looking for fine software \ / Respect for open standards and/or writing? X No HTML/RTF in email http://www.charlescurley.com / \ No M$ Word docs in email Key fingerprint = CE5C 6645 A45A 64E4 94C0 809C FFF6 4C48 4ECD DFDB
Attachment:
pgpa5JSiztYs1.pgp
Description: PGP signature
