> >Am Do, Jan 13, 2005 at 08:48:56 -0500 schrieb Don Flinn: >> > >Am So, Jan 09, 2005 at 11:24:09 -0500 schrieb Don Flinn: >> >> How do I set up my local printer (run from FC3), to be usable by windows >> >> applications under wine? Under windows I would go Start -> Printers and >> >> Fax -> Add a printer -> ... >> >> >If you are using CUPS you don't have to do anything. Just start your >> >windows application and print. Your printers are already there. You can >> >not use windows printer drivers with Wine. >> >> >Regards >> > Joachim >> >> >> Thank you for your suggestions. >> >> My printer is listed in /etc/cups/printers.conf and I can print from >> programs running outside wine, so I assume cups is working ok. I must >> be missing some setup internal to wine. I am using wine 20041201. The >> programs I'm trying to run under wine say that no printer is installed >> and when I go to the printer setup in, for example quickbooks, it tells >> me to go to windows and install the printer. I checked some other >> programs running under wine and I can't print from them also. > >IN the config the region [spooler] must be commented out with ; in front >of each line. > >Regards > Joachim Joachim The spooler section of my wine config is as below. This is untouched from the 20041201 source tree and as you can see not commented out. I suspect that LPT1 should have a different incantation. Could you give the command to me, if that's the problem? [spooler] "FILE:" = "tmp.ps" "LPT1:" = "|lpr" "LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -" "LPT3:" = "/dev/lp3" (Bill, I haven't tried standing on a chair and reciting poetry - yet :-) Don _______________________________________________ wine-users mailing list wine-users@xxxxxxxxxx http://www.winehq.org/mailman/listinfo/wine-users
