Hello! I have a program which works fine with "Wine 20030115" (shipped with SuSE-8.2). Using the same program with "Wine 20041201" (after Upgrade to SuSE-9.2) does not work anymore. The communication with the device connectet to the seriel port does not work. I converted my old .wine/config from: [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4" = "/dev/modem" so that .wine/dosdevices/com1 is a link to /dev/ttyS0 ... The rights are ok: schmidtj@schmidt-l:~> ls -l .wine/dosdevices/com1 lrwxrwxrwx 1 schmidtj users 10 2005-01-05 09:40 .wine/dosdevices/com1 -> /dev/ttyS0 schmidtj@schmidt-l:~> ls -l /dev/ttyS0 crw-rw---- 1 root uucp 4, 64 2005-01-11 08:42 /dev/ttyS0 schmidtj@schmidt-l:~> groups users disk uucp dialout video Futhermore I used the default-installation from SuSE-8.2 and SuSE-9.2. while debugging I found with WINEDEBUG=+win32,+comm,+file some warn:file:wine_nt_to_unix_file_name "required a case-insensitive search" Does that matter? Debugging with "WINEDEBUG=+comm,+file" gives trace:file:CreateFileW L"COM1" GENERIC_READ GENERIC_WRITE OPEN_EXISTING attributes 0x80 trace:file:RtlDosPathNameToNtPathName_U (L"COM1",0x406cf6cc,(nil),(nil)) trace:file:RtlGetFullPathName_U (L"COM1" 520 0x406cf448 (nil)) trace:file:get_dos_device L"COM1" -> "/home/schmidtj/.wine/dosdevices/com1" trace:file:CreateFileW returning 0x38 fixme:comm:SetupComm insize 2048 outsize 2048 unimplemented stub trace:comm:BuildCommDCBAndTimeoutsA (baud=38400 parity=N data=8 stop=1 to=off xon=off odsr=off octs=off dtr=off rts=on idsr=off,0x406cf760,(nil)) trace:comm:BuildCommDCBAndTimeoutsW (L"baud=38400 parity=N data=8 stop=1 to=off xon=off odsr=off octs=off dtr=off rts=on idsr=off",0x406cf760,(nil)) trace:comm:SetCommState handle 0x38, ptr 0x406cf760 trace:comm:SetCommState bytesize 8 baudrate 38400 fParity 0 Parity 0 stopbits 1 trace:comm:SetCommState ~IXON ~IXOFF trace:comm:SetCommState fOutxCtsFlow 0 fRtsControl 1 trace:comm:SetCommState fOutxDsrFlow 0 fDtrControl0 trace:comm:PurgeComm handle 0x38, flags f trace:comm:PurgeComm handle 0x38, flags f trace:comm:GetCommTimeouts (0x38,0x406cf7d8) trace:file:WriteFile 0x38 0x406cf824 10 0x406cf7f0 (nil) trace:comm:ClearCommError handle 0x38 cbInQue = 0 cbOutQue = 0 indicating, that the program wants to write 10 Bytes but nothing goes to the Queue. I haved patched the serial driver so that every Byte which the driver sendet and received was printed to the syslog via printk. There was no communication reported. What is wrong? How can I get the program work again? sy, Jan _______________________________________________ wine-users mailing list wine-users@xxxxxxxxxx http://www.winehq.org/mailman/listinfo/wine-users
