Dear sir Lawson Whitney Dana ponedeljak 11. februar 2002. 01:16 napisali ste: > On Sun, 10 Feb 2002, [iso-8859-2] Duško Rusmir wrote: > > > baudrates 5760 and 5726 are not physically possible with > > > normal comm hardware. Where is the app getting them? 57600 > > > is, 5760 is not. > > > > I use this Baudrates wery well in Windows with those app. I > > don't will load everytime if I will use these app. > > > > I must use 5726, 5760 and 9600. My app need this to work. On > > 4800 and 9600 (Oops) I got error. > > Oops, 5760 is physically possible with a custom divisor of 20, I > think. 5726 is not. You set the speed of a UART by loading an > integer valus into the divisor regisgter. The UART then divides > its maximum speed by that number. If the divisor is 2, it runs > at 57600. There is no integer you can divide 115200 by to get > 5726. There is also no provision in Wine to use a custom > divisor, I think, but combined with linux system commands, there > is. Set the app to use 38400. Beforstarting the app, do > setserial /dev/ttyS<n> spd_cust divisor 20 > > when the app asks for 38400, it should actually get 5760. If it > doesn't work, show me the output of: No at all 38400 : 20 = 1920 Right is 115200 : 20 = 5760 5760 don't work although it is a possible dividor 20! > setserial -a /dev/ttyS<n> > > <n> is the number of the comm port -1, unless you have > ~/.wine/config set oddly. You can make "Com1" = > "/any/damn/thing" but it might not work, or "Com1" = > "/dev/ttyS3" (if the serial port you mean to use is on com4, > that will work, but it will confuse me unless I see your > .wine/config)) > > and > > wine --debugmsg +file,+comm blah.exe 2>&1 |tee ~/logfile > > (a copy of the debug messages will be in ~/logfile) > gzip it before putting it in the mail, please. > > > With other app I can use 38400, 57600 and 115200 wery well. 9600 works also fine. 115200 : 12 = 9600 but it works whit 115200 and divisor 0!!! > > I thing the handling of COM Port on these BaudRate is't good. > > I'm telling you, 5726 isn't _possible_ with a standard UART. Yes, I can't get 5726 from 38400, 57600 or 115200 at all, but it works in Windoze very well. I think it is a Way to get 5726, but Gates don't give the source. > > Thanks > > Dam'. I've lost track of the other 2 Wine developers who work > on serial comms. I'll find them and forward some of this to > them. I've been acting sort of as Wine comms gopher lately. > Guess I should look into that fixme too. I have tryied some possibility. Take a Look on Attachment Wine-COM.tgz, please. Thanks much, I am waiting for resolution. -- MfG / With best Regards Rusmir Duško Registered Linux user: #130654 http://counter.li.org
Attachment:
Wine_COM.tgz
Description: GNU Zip compressed data
