|
Hi~
I created 2 vlan interface on my pc:eth2.2 & eth2.3
I also created 2 vlan tag(2 & 3) on vlan switch... I have 2 ISP links:Tag2=A_Net & Tag3=B_Net connected on switch;My OS is Fedora 5 Topology:PC=>Switch=>ISP's Modem When I use dhcp client software to get eth2.2 and eth2.3's IP,I can get them correctly. But If I ask ISP to change the links become PPPoE...I always get error message... Debug Message: --------------------------------------------- * The following section shows the pppd command we will invoke pppd invocation /usr/sbin/pppd pty '/usr/sbin/pppoe -p /var/run/pppoe.conf3-pppoe.pid.pppoe -I eth2.3 -T 120 -U -m 1412 ' noipdefault persist noauth default-asyncmap defaultroute hide-password nodetach mtu 1492 mru 1492 noaccomp nodeflate nopcomp novj novjccomp user ac01119424 lcp-echo-interval 30 lcp-echo-failure 4 debug --------------------------------------------- using channel 4 Using interface ppp2 Connect: ppp2 <--> /dev/pts/4 Warning - secret file /etc/ppp/pap-secrets has world and/or group access sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] sent [LCP ConfReq id=0x1 <mru 1492> <magic 0xc7104a84>] LCP: timeout sending Config-Requests Connection terminated. using channel 5 Using interface ppp2 Connect: ppp2 <--> /dev/pts/5 Waiting for 2 child processes... script /usr/sbin/pppoe -p /var/run/pppoe.conf3-pppoe.pid.pppoe -I eth2.3 -T 120 -U -m 1412 -D /tmp/pppoe-debug-11189/pppoe-debug.txt-0, pid 11524 script /usr/sbin/pppoe -p /var/run/pppoe.conf3-pppoe.pid.pppoe -I eth2.3 -T 120 -U -m 1412 -D /tmp/pppoe-debug-11189/pppoe-debug.txt-0, pid 11254 Warning - secret file /etc/ppp/pap-secrets has world and/or group access sent [LCP ConfReq id=0x2 <mru 1492> <magic 0xd6886e5c>] pppoe: Timeout waiting for PADO packets Script /usr/sbin/pppoe -p /var/run/pppoe.conf3-pppoe.pid.pppoe -I eth2.3 -T 120 -U -m 1412 -D /tmp/pppoe-debug-11189/pppoe-debug.txt-0 finished (pid 11254), status = 0x1 sent [LCP ConfReq id=0x2 <mru 1492> <magic 0xd6886e5c>] sending SIGTERM to process 11524 tcflush failed: Bad file descriptor --------------------------------------------- * The following section is a dump of the packets * sent and received by rp-pppoe. If you don't see * any output, it's an Ethernet driver problem. If you only * see three PADI packets and nothing else, check your cables * and modem. Make sure the modem lights flash when you try * to connect. Check that your Ethernet card is in * half-duplex, 10Mb/s mode. If all else fails, * try using pppoe-sniff. rp-pppoe debugging dump rp-pppoe-3.8 02:51:47.213 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12 SourceAddr 00:14:b7:00:08:73 DestAddr ff:ff:ff:ff:ff:ff 01 01 00 00 01 03 00 04 04 2d 00 00 .........-.. Who can help me??? thank you very much... Best regards,
Brian Lu |
_______________________________________________ Vlan mailing list Vlan@xxxxxxxxxxxxxxx http://www.candelatech.com/mailman/listinfo/vlan
