On Fri, Aug 25, 2023 at 05:47:32PM +0200, Mario Marietto wrote: > ---> If you do only build-dep for libvirt you will have no virt-manager and > you would not be able to use it. You would have only libvirt. > > I don't want to use libvirt without the graphic frontend. It makes no > sense. At this point,if I can't use virt-manager,I would have used the qemu > parameters directly. Ok, I did not make myself clear in that case. The point is you still need to install virt-manager using package manager or get it from upstream. `apt build-dep` install packages that are required to build that package but will not install the package itself. `apt install` will install that package with all dependencies to use that package. The main difference is `to build` and `to run` the package. The issue with `apt install virt-manager` is that it will install also libvirt and qemu using package manager but you will not uses these installed libvirt and qemu as you are building your own. You can still definitely use virt-manager even if you build libvirt and qemu yourself, but you need to install it or get it some other way. Pavel > > > On Fri, Aug 25, 2023 at 3:50 PM Mario Marietto <marietto2008@xxxxxxxxx> > wrote: > > > As normal user,instead,I don't see the previous errors,but virt-manager is > > missing : > > > > marietto@chromarietto:~$ libvirtd & > > [1] 1947 > > > > marietto@chromarietto:~$ ps ax | grep libvirt > > > > 1947 pts/0 Sl 0:00 libvirtd > > 1974 pts/0 S+ 0:00 grep libvirt > > > > marietto@chromarietto:~$ virt-manager > > -bash: virt-manager: command not found > > > > On Fri, Aug 25, 2023 at 3:35 PM Mario Marietto <marietto2008@xxxxxxxxx> > > wrote: > > > >> Finally we can understand well what's wrong : > >> > >> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# libvirtd & > >> > >> [1] 1784 > >> > >> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# 2023-08-25 > >> 13:32:41.245+0000: 1801: info : libvirt version: 9.7.0 > >> > >> 2023-08-25 13:32:41.245+0000: 1801: info : hostname: chromarietto > >> > >> 2023-08-25 13:32:41.245+0000: 1801: error : > >> virFirewallApplyRuleDirect:518 : internal error: Failed to apply firewall > >> rules /usr/sbin/iptables -w --table mangle --list-rules: iptables v1.8.9 > >> (legacy): can't initialize iptables table `mangle': Table does not exist > >> (do you need to insmod?) > >> Perhaps iptables or your kernel needs to be upgraded. > >> > >> 2023-08-25 13:32:41.263+0000: 1801: error : > >> virFirewallApplyRuleDirect:518 : internal error: Failed to apply firewall > >> rules /usr/sbin/ip6tables -w --table filter --list-rules: modprobe: FATAL: > >> Module ip6_tables not found in directory /lib/modules/5.4.244-stb-cbe > >> ip6tables v1.8.9 (legacy): can't initialize ip6tables table `filter': > >> Table does not exist (do you need to insmod?). Perhaps ip6tables or your > >> kernel needs to be upgraded. > >> > >> 2023-08-25 13:32:41.693+0000: 1801: error : virGetUserID:760 : invalid > >> argument: Failed to parse user 'libvirt-qemu' > >> 2023-08-25 13:32:41.699+0000: 1801: error : virStateInitialize:672 : > >> Initialization of QEMU state driver failed: invalid argument: Failed to > >> parse user 'libvirt-qemu' > >> 2023-08-25 13:32:41.699+0000: 1801: error : daemonRunStateInit:617 : > >> Driver state initialization failed > >> > >> On Fri, Aug 25, 2023 at 2:51 PM Mario Marietto <marietto2008@xxxxxxxxx> > >> wrote: > >> > >>> it does not care,I solve it following this small tutorial : > >>> > >>> https://www.cnblogs.com/dream397/p/13850629.html > >>> > >>> thanks anyway. You are very gentle with me. > >>> > >>> On Fri, Aug 25, 2023 at 2:39 PM Mario Marietto <marietto2008@xxxxxxxxx> > >>> wrote: > >>> > >>>> On Debian bookworm I get a compilation error,but not on Devuan : > >>>> > >>>> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# ./configure > >>>> --disable-werror --target-list=arm-softmmu --enable-opengl --enable-gtk > >>>> --enable-kvm --enable-guest-agent --enable-spice --audio-drv-list="oss pa" > >>>> --enable-libusb --enable-trace-backend=simple --enable-debug > >>>> --prefix=/usr/local > >>>> > >>>> Install prefix /usr/local > >>>> BIOS directory /usr/local/share/qemu > >>>> firmware path /usr/local/share/qemu-firmware > >>>> binary directory /usr/local/bin > >>>> library directory /usr/local/lib > >>>> module directory /usr/local/lib/qemu > >>>> libexec directory /usr/local/libexec > >>>> include directory /usr/local/include > >>>> config directory /usr/local/etc > >>>> local state directory /usr/local/var > >>>> Manual directory /usr/local/share/man > >>>> ELF interp prefix /usr/gnemul/qemu-%M > >>>> Build directory /home/marietto/Desktop/Dati/qemu-v5.1.0 > >>>> Source path /home/marietto/Desktop/Dati/qemu-v5.1.0 > >>>> GIT binary git > >>>> GIT submodules ui/keycodemapdb tests/fp/berkeley-testfloat-3 > >>>> tests/fp/berkeley-softfloat-3 dtc capstone slirp > >>>> C compiler cc > >>>> Host C compiler cc > >>>> C++ compiler c++ > >>>> Objective-C compiler cc > >>>> ARFLAGS rv > >>>> CFLAGS -g > >>>> QEMU_CFLAGS -I/usr/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt > >>>> -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/gl > >>>> ib-2.0/include -fPIE -DPIE -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 > >>>> -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wund > >>>> ef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing > >>>> -fno-common -fwrapv -std=gnu99 -Wold-style-declaration -Wold-style-defini > >>>> tion -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self > >>>> -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpan > >>>> sion-to-defined -Wno-missing-include-dirs -Wno-shift-negative-value > >>>> -Wno-psabi -fstack-protector-strong -I/usr/include/p11-kit-1 -D > >>>> STRUCT_IOVEC_DEFINED -I/usr/include/libpng16 -I/usr/include/spice-1 > >>>> -I/usr/include/spice-server -I$(SRC_PATH)/capstone/include > >>>> QEMU_LDFLAGS -L$(BUILD_DIR)/dtc/libfdt -Wl,--warn-common > >>>> -Wl,-z,relro -Wl,-z,now -pie -fstack-protector-strong > >>>> make make > >>>> install install > >>>> python /usr/bin/python3 -B (3.11.2) > >>>> genisoimage > >>>> efi_aarch64 > >>>> /home/marietto/Desktop/Dati/qemu-v5.1.0/pc-bios/edk2-aarch64-code.fd > >>>> python_yaml no > >>>> slirp support git > >>>> smbd /usr/sbin/smbd > >>>> module support no > >>>> alt path mod load no > >>>> host CPU arm > >>>> host big endian no > >>>> target list arm-softmmu > >>>> gprof enabled no > >>>> sparse enabled no > >>>> strip binaries no > >>>> profiler no > >>>> static build no > >>>> safe stack no > >>>> SDL support no > >>>> SDL image support no > >>>> GTK support yes (3.24.37) > >>>> GTK GL support yes > >>>> VTE support no > >>>> TLS priority NORMAL > >>>> GNUTLS support yes > >>>> libgcrypt no > >>>> nettle yes (3.8.1) > >>>> XTS yes > >>>> libtasn1 yes > >>>> PAM no > >>>> iconv support yes > >>>> curses support yes > >>>> virgl support no > >>>> curl support yes > >>>> mingw32 support no > >>>> Audio drivers oss pa > >>>> Block whitelist (rw) > >>>> Block whitelist (ro) > >>>> VirtFS support yes > >>>> Multipath support no > >>>> VNC support yes > >>>> VNC SASL support yes > >>>> VNC JPEG support yes > >>>> VNC PNG support yes > >>>> xen support yes > >>>> xen ctrl version 41700 > >>>> brlapi support no > >>>> Documentation no > >>>> PIE yes > >>>> vde support no > >>>> netmap support no > >>>> Linux AIO support no > >>>> Linux io_uring support no > >>>> ATTR/XATTR support yes > >>>> Install blobs yes > >>>> KVM support yes > >>>> HAX support no > >>>> HVF support no > >>>> WHPX support no > >>>> TCG support yes > >>>> TCG debug enabled yes > >>>> TCG interpreter no > >>>> malloc trim support yes > >>>> RDMA support no > >>>> PVRDMA support no > >>>> fdt support git > >>>> membarrier no > >>>> preadv support yes > >>>> fdatasync yes > >>>> madvise yes > >>>> posix_madvise yes > >>>> posix_memalign yes > >>>> libcap-ng support yes > >>>> vhost-net support yes > >>>> vhost-crypto support yes > >>>> vhost-scsi support yes > >>>> vhost-vsock support yes > >>>> vhost-user support yes > >>>> vhost-user-fs support yes > >>>> vhost-vdpa support yes > >>>> Trace backends simple > >>>> Trace output file trace-<pid> > >>>> spice support yes (0.14.3/0.15.1) > >>>> rbd support yes > >>>> xfsctl support no > >>>> smartcard support no > >>>> libusb yes > >>>> usb net redir no > >>>> OpenGL support yes > >>>> OpenGL dmabufs yes > >>>> libiscsi support yes > >>>> libnfs support no > >>>> build guest agent yes > >>>> QGA VSS support no > >>>> QGA w32 disk info no > >>>> QGA MSI support no > >>>> seccomp support no > >>>> coroutine backend ucontext > >>>> coroutine pool yes > >>>> debug stack usage no > >>>> mutex debugging yes > >>>> crypto afalg no > >>>> GlusterFS support yes > >>>> gcov gcov > >>>> gcov enabled no > >>>> TPM support yes > >>>> libssh support yes > >>>> QOM debugging yes > >>>> Live block migration yes > >>>> lzo support no > >>>> snappy support no > >>>> bzip2 support no > >>>> lzfse support no > >>>> zstd support yes > >>>> NUMA host support yes > >>>> libxml2 yes > >>>> tcmalloc support no > >>>> jemalloc support no > >>>> avx2 optimization > >>>> avx512f optimization no > >>>> replication support yes > >>>> bochs support yes > >>>> cloop support yes > >>>> dmg support yes > >>>> qcow v1 support yes > >>>> vdi support yes > >>>> vvfat support yes > >>>> qed support yes > >>>> parallels support yes > >>>> sheepdog support yes > >>>> capstone git > >>>> libpmem support no > >>>> libdaxctl support no > >>>> libudev yes > >>>> default devices yes > >>>> plugin support no > >>>> fuzzing support no > >>>> gdb > >>>> rng-none no > >>>> Linux keyring yes > >>>> cross containers no > >>>> > >>>> NOTE: guest cross-compilers enabled: cc > >>>> > >>>> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# apt install > >>>> libfdt-dev libdt-utils-dev python3-libfdt > >>>> > >>>> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# make > >>>> > >>>> GEN arm-softmmu/config-devices.mak.tmp > >>>> GEN arm-softmmu/config-devices.mak > >>>> GEN config-all-devices.mak > >>>> GEN config-host.h > >>>> make[1]: Entering directory > >>>> '/home/marietto/Desktop/Dati/qemu-v5.1.0/slirp' > >>>> make[1]: Nothing to be done for 'all'. > >>>> make[1]: Leaving directory > >>>> '/home/marietto/Desktop/Dati/qemu-v5.1.0/slirp' > >>>> make[1]: *** No rule to make target > >>>> '/root/Desktop/qemu-v5.1.0/dtc/libfdt/fdt.h', needed by 'libfdt/fdt.o'. > >>>> Stop. > >>>> make: *** [Makefile:536: dtc/all] Error 2 > >>>> > >>>> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# cd dtc > >>>> > >>>> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0/dtc# cd > >>>> libfdt > >>>> > >>>> root@chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0/dtc/libfdt# > >>>> ls > >>>> > >>>> fdt_addresses.c fdt_check.d fdt_empty_tree.o fdt_overlay.o > >>>> fdt_rw.d fdt_sw.c fdt_wip.o Makefile.libfdt > >>>> fdt_addresses.d fdt_check.o fdt.h fdt_ro.c > >>>> fdt_rw.o fdt_sw.d libfdt.a TODO > >>>> fdt_addresses.o fdt.d fdt.o fdt_ro.d > >>>> fdt_strerror.c fdt_sw.o libfdt_env.h version.lds > >>>> fdt.c fdt_empty_tree.c fdt_overlay.c fdt_ro.o > >>>> fdt_strerror.d fdt_wip.c libfdt.h > >>>> fdt_check.c fdt_empty_tree.d fdt_overlay.d fdt_rw.c > >>>> fdt_strerror.o fdt_wip.d libfdt_internal.h > >>>> > >>>> > >>>> > >>>> On Fri, Aug 25, 2023 at 10:51 AM Pavel Hrdina <phrdina@xxxxxxxxxx> > >>>> wrote: > >>>> > >>>>> On Thu, Aug 24, 2023 at 10:40:40PM +0200, Mario Marietto wrote: > >>>>> > I've installed Debian bookworm instead of devuan. Maybe it's > >>>>> easier,since I > >>>>> > know debian better than devuan. Let me understand a point : should I > >>>>> issue > >>>>> > "apt build-dep libvirt" instead of "apt install virt-manager" ? > >>>>> aren't they > >>>>> > equivalent commands ? Usually,as soon as I reinstall Debian,I do the > >>>>> > installation of virt-manager and it grabs all its dependencies. If I > >>>>> > understand correctly,I should not install virt-manager and its > >>>>> > dependencies,right ? thanks. > >>>>> > >>>>> If you run `apt install virt-manager` it will install virt-manager, > >>>>> libvirt, qemu and everything needed to run and use the software. > >>>>> If you run `apt build-dep libvirt` it will install everything needed to > >>>>> compile libvirt but not necessarily everything you need to actually run > >>>>> it. If you do only build-dep for libvirt you will have no virt-manager > >>>>> and you would not be able to use it. You would have only libvirt. > >>>>> > >>>>> > On Thu, Aug 24, 2023 at 3:16 PM Pavel Hrdina <phrdina@xxxxxxxxxx> > >>>>> wrote: > >>>>> > > >>>>> > > On Wed, Aug 23, 2023 at 08:47:55PM +0200, Mario Marietto wrote: > >>>>> > > > I've fixed this problem : > >>>>> > > > > >>>>> > > > virsh: /lib/arm-linux-gnueabihf/libvirt.so.0: version > >>>>> > > > `LIBVIRT_PRIVATE_9.0.0' not found (required by virsh) > >>>>> > > > > >>>>> > > > now,virsh works if I launch it within the build directory of > >>>>> libvirt : > >>>>> > > > > >>>>> > > > root@devuan:~/libvirt_build/bin# ./virsh > >>>>> > > > Welcome to virsh, the virtualization interactive terminal. > >>>>> > > > > >>>>> > > > Type: 'help' for help with commands > >>>>> > > > 'quit' to quit > >>>>> > > > > >>>>> > > > but inside the build directory of libvirt I don't see any > >>>>> virt-manager > >>>>> > > > executable,so I'm forced to run it like this : > >>>>> > > > > >>>>> > > > root@devuan:~/Desktop/libvirt/build# ./run /usr/bin/virt-manager > >>>>> > > > > >>>>> > > > and it gives the previous error : no connection driver available > >>>>> for > >>>>> > > > qemu:///system > >>>>> > > > > >>>>> > > > but the fact that virsh works is a progress ? should I compile > >>>>> > > virt-manager > >>>>> > > > also from source code ? > >>>>> > > > >>>>> > > No, there is no need to compile virt-manager, it is written in > >>>>> python > >>>>> > > and so there is no compilation involved at all. > >>>>> > > > >>>>> > > > >>>>> > > I would probably recommend you to remove `~/libvirt_build/` and > >>>>> > > `~/Desktop/libvirt/build/` directories and start again. > >>>>> > > > >>>>> > > If you've successfully installed all libvirt build dependencies > >>>>> using > >>>>> > > `apt build-dep libvirt` you should have everything to build your > >>>>> own > >>>>> > > libvirt if you are on Devuan 5. > >>>>> > > > >>>>> > > The next step would be configuring libvirt so you can compile it > >>>>> using > >>>>> > > the following command executed in the libvirt source directory: > >>>>> > > > >>>>> > > meson setup build > >>>>> > > > >>>>> > > Once that is completed you can build and install your libvirt using > >>>>> > > the following command directly from the source directory as well: > >>>>> > > > >>>>> > > ninja -C build > >>>>> > > sudo ninja -C build install > >>>>> > > > >>>>> > > The first one will build libvirt (I would not run it as root) and > >>>>> the > >>>>> > > second one will install it into /usr/local/. > >>>>> > > > >>>>> > > After that is done you should be able to run virsh and libvirtd > >>>>> directly > >>>>> > > without any run script. You can verify which binary is actually > >>>>> used if > >>>>> > > you run the following: > >>>>> > > > >>>>> > > which virsh > >>>>> > > which libvirtd > >>>>> > > > >>>>> > > If everything is correct you should get these paths: > >>>>> > > > >>>>> > > /usr/local/bin/virsh > >>>>> > > /usr/local/sbin/libvirtd > >>>>> > > > >>>>> > > Now you should be able to simply run `libvirtd &` to start the > >>>>> daemon. > >>>>> > > > >>>>> > > After that running `virsh version` or any virsh command should just > >>>>> > > work. Running `virt-manager` should also work and connect to the > >>>>> correct > >>>>> > > libvirt. > >>>>> > > > >>>>> > > > >>>>> > > I also tried installing QEMU build dependencies using `apt > >>>>> build-dep qemu` > >>>>> > > and used the following steps to build QEMU 5.1.0 from source > >>>>> directory: > >>>>> > > > >>>>> > > mkdir build > >>>>> > > cd build > >>>>> > > ../configure (with options, I'm doing it on x86_64 so they are > >>>>> bit > >>>>> > > different) > >>>>> > > make > >>>>> > > sudo make install > >>>>> > > > >>>>> > > But you should have theses steps completed already. Again you can > >>>>> verify > >>>>> > > that you are using correct qemu-system-arm running: > >>>>> > > > >>>>> > > which qemu-system-arm > >>>>> > > > >>>>> > > where you should get > >>>>> > > > >>>>> > > /usr/local/bin/qemu-system-arm > >>>>> > > > >>>>> > > If you complete all of the build and install steps like here and > >>>>> start > >>>>> > > libvirtd after that you should have everything set to work properly > >>>>> > > and starting `virt-manager` without any special path should just > >>>>> work. > >>>>> > > > >>>>> > > I verified all of this on Devuan 5 but on x86_64 architecture, > >>>>> don't > >>>>> > > have any 32bit arm to try it on. > >>>>> > > > >>>>> > > Pavel > >>>>> > > > >>>>> > > > >>>>> > > > On Wed, Aug 23, 2023 at 7:39 PM Mario Marietto < > >>>>> marietto2008@xxxxxxxxx> > >>>>> > > > wrote: > >>>>> > > > > >>>>> > > > > Despite that error,the previous error is still there : > >>>>> > > > > > >>>>> > > > > Unable to connect to libvirt qemu:///system. > >>>>> > > > > > >>>>> > > > > no connection driver available for qemu:///system > >>>>> > > > > > >>>>> > > > > Libvirt URI is: qemu:///system > >>>>> > > > > > >>>>> > > > > Traceback (most recent call last): > >>>>> > > > > File "/usr/share/virt-manager/virtManager/connection.py", > >>>>> line 923, > >>>>> > > in > >>>>> > > > > _do_open > >>>>> > > > > self._backend.open(cb, data) > >>>>> > > > > File "/usr/share/virt-manager/virtinst/connection.py", line > >>>>> 171, in > >>>>> > > open > >>>>> > > > > conn = libvirt.openAuth(self._open_uri, > >>>>> > > > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > >>>>> > > > > File "/usr/lib/python3/dist-packages/libvirt.py", line 147, > >>>>> in > >>>>> > > openAuth > >>>>> > > > > raise libvirtError('virConnectOpenAuth() failed') > >>>>> > > > > libvirt.libvirtError: no connection driver available for > >>>>> qemu:///system > >>>>> > > > > > >>>>> > > > > I'm using qemu 5.1 : > >>>>> > > > > > >>>>> > > > > root@devuan:~# qemu-system-arm --version > >>>>> > > > > > >>>>> > > > > QEMU emulator version 5.1.0 (v5.1.0-dirty) > >>>>> > > > > > >>>>> > > > > > >>>>> > > > > On Wed, Aug 23, 2023 at 7:30 PM Mario Marietto < > >>>>> marietto2008@xxxxxxxxx > >>>>> > > > > >>>>> > > > > wrote: > >>>>> > > > > > >>>>> > > > >> root@devuan:~/Desktop/libvirt/build# sudo virsh list --all > >>>>> > > > >> > >>>>> > > > >> virsh: /lib/arm-linux-gnueabihf/libvirt.so.0: version > >>>>> > > > >> `LIBVIRT_PRIVATE_9.0.0' not found (required by virsh) > >>>>> > > > >> > >>>>> > > > >> > >>>>> > > > >> > >>>>> > > > >> On Wed, Aug 23, 2023 at 5:43 PM Pavel Hrdina < > >>>>> phrdina@xxxxxxxxxx> > >>>>> > > wrote: > >>>>> > > > >> > >>>>> > > > >>> On Wed, Aug 23, 2023 at 03:41:42PM +0200, Mario Marietto > >>>>> wrote: > >>>>> > > > >>> > Hello Pavel, > >>>>> > > > >>> > > >>>>> > > > >>> > It didn't work,but the error was changed. Isn't a bad news > >>>>> : > >>>>> > > > >>> > > >>>>> > > > >>> > root@devuan:~/Desktop/libvirt/build# ./run > >>>>> /usr/bin/virt-manager > >>>>> > > > >>> > > >>>>> > > > >>> > Unable to connect to libvirt qemu:///system. > >>>>> > > > >>> > > >>>>> > > > >>> > no connection driver available for qemu:///system > >>>>> > > > >>> > > >>>>> > > > >>> > Libvirt URI is: qemu:///system > >>>>> > > > >>> > > >>>>> > > > >>> > Traceback (most recent call last): > >>>>> > > > >>> > File > >>>>> "/usr/share/virt-manager/virtManager/connection.py", line > >>>>> > > 923, > >>>>> > > > >>> in > >>>>> > > > >>> > _do_open > >>>>> > > > >>> > self._backend.open(cb, data) > >>>>> > > > >>> > File "/usr/share/virt-manager/virtinst/connection.py", > >>>>> line 171, > >>>>> > > in > >>>>> > > > >>> open > >>>>> > > > >>> > conn = libvirt.openAuth(self._open_uri, > >>>>> > > > >>> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > >>>>> > > > >>> > File "/usr/lib/python3/dist-packages/libvirt.py", line > >>>>> 147, in > >>>>> > > > >>> openAuth > >>>>> > > > >>> > raise libvirtError('virConnectOpenAuth() failed') > >>>>> > > > >>> > libvirt.libvirtError: no connection driver available for > >>>>> > > qemu:///system > >>>>> > > > >>> > >>>>> > > > >>> Seems like you've compiled libvirt without qemu support. My > >>>>> guess is > >>>>> > > > >>> that you are missing dependencies to compile libvirt with > >>>>> QEMU > >>>>> > > driver. > >>>>> > > > >>> If you run > >>>>> > > > >>> > >>>>> > > > >>> apt build-dep libvirt > >>>>> > > > >>> > >>>>> > > > >>> it should install you dependencies that libvirt from package > >>>>> manager > >>>>> > > > >>> would need and that is a good starting point to compile your > >>>>> own > >>>>> > > > >>> libvirt. > >>>>> > > > >>> > >>>>> > > > >>> > >>>>> > > > >>> > On Wed, Aug 23, 2023 at 2:27 PM Pavel Hrdina < > >>>>> phrdina@xxxxxxxxxx> > >>>>> > > > >>> wrote: > >>>>> > > > >>> > > >>>>> > > > >>> > > On Tue, Aug 22, 2023 at 10:23:32PM +0200, Mario Marietto > >>>>> wrote: > >>>>> > > > >>> > > > After having compiled libvirt from src and having run > >>>>> > > > >>> virt-manager,I get > >>>>> > > > >>> > > > the error "Libvirtd daemon is not running". Can you > >>>>> give a > >>>>> > > look at > >>>>> > > > >>> this > >>>>> > > > >>> > > > picture ? > >>>>> > > > >>> > > > > >>>>> > > > >>> > > > https://ibb.co/n6MvDbL > >>>>> > > > >>> > > > > >>>>> > > > >>> > > > how to fix it ? thanks. > >>>>> > > > >>> > > > >>>>> > > > >>> > > If you managed to start libvirtd using the run script > >>>>> from > >>>>> > > libvirt > >>>>> > > > >>> build > >>>>> > > > >>> > > directory you should use the run script to start > >>>>> virt-manager as > >>>>> > > > >>> well. > >>>>> > > > >>> > > > >>>>> > > > >>> > > > On Tue, Aug 22, 2023 at 10:17 PM Mario Marietto < > >>>>> > > > >>> marietto2008@xxxxxxxxx> > >>>>> > > > >>> > > > wrote: > >>>>> > > > >>> > > > > >>>>> > > > >>> > > > > [image: Screenshot from 2023-08-22 22-06-30.png] > >>>>> > > > >>> > > > > > >>>>> > > > >>> > > > > On Tue, Aug 22, 2023 at 9:44 PM Mario Marietto < > >>>>> > > > >>> marietto2008@xxxxxxxxx > >>>>> > > > >>> > > > > >>>>> > > > >>> > > > > wrote: > >>>>> > > > >>> > > > > > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> Hello, > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> Pavel,are you there ? Please help me to give it the > >>>>> last > >>>>> > > push. > >>>>> > > > >>> I've > >>>>> > > > >>> > > fixed > >>>>> > > > >>> > > > >> the last error like so : > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> root@devuan:~/Desktop/libvirt/build# > >>>>> update-alternatives > >>>>> > > --set > >>>>> > > > >>> > > iptables > >>>>> > > > >>> > > > >> /usr/sbin/iptables-legacy > >>>>> > > > >>> > > > >> update-alternatives: using > >>>>> /usr/sbin/iptables-legacy to > >>>>> > > provide > >>>>> > > > >>> > > > >> /usr/sbin/iptables (iptables) in manual mode > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> but now I have got another error. Anyway,I feel to > >>>>> be close > >>>>> > > : > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> root@devuan:~/Desktop/libvirt/build# sudo ./run > >>>>> > > src/virtlockd > >>>>> > > > >>> & sudo > >>>>> > > > >>> > > > >> ./run src/virtlogd & sudo ./run src/libvirtd > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> 2023-08-22 19:38:49.036+0000: 15002: info : libvirt > >>>>> version: > >>>>> > > > >>> 9.7.0 > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> hostname: devuan > >>>>> > > > >>> > > > >> error : virPidFileAcquirePathFull:409 : Failed to > >>>>> acquire > >>>>> > > pid > >>>>> > > > >>> file > >>>>> > > > >>> > > > >> '/root/libvirt_build/var/run/virtlockd.pid': > >>>>> Resource > >>>>> > > > >>> temporarily > >>>>> > > > >>> > > > >> unavailable > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> On Tue, Aug 22, 2023 at 7:01 PM Mario Marietto < > >>>>> > > > >>> > > marietto2008@xxxxxxxxx> > >>>>> > > > >>> > > > >> wrote: > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >>> Et voila'. I've recompiled libvirt in this way : > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> git clone https://github.com/libvirt/libvirt.git > >>>>> > > > >>> > > > >>> mkdir -p libvirt_build > >>>>> > > > >>> > > > >>> cd libvirt > >>>>> > > > >>> > > > >>> apt install meson xsltproc libgnutls28-dev > >>>>> libxml2-dev > >>>>> > > rst2pdf > >>>>> > > > >>> > > > >>> meson build --prefix=$HOME/libvirt_build > >>>>> > > > >>> > > > >>> ninja -C build > >>>>> > > > >>> > > > >>> sudo ninja -C build install > >>>>> > > > >>> > > > >>> cd build > >>>>> > > > >>> > > > >>> nano vai.sh : > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> sudo ./run src/virtlockd & sudo ./run src/virtlogd > >>>>> & sudo > >>>>> > > ./run > >>>>> > > > >>> > > > >>> src/libvirtd > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> chmod +x vai.sh > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> this is the error I get : > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> root@devuan:~/Desktop/libvirt/build# ./vai.sh > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: info : libvirt > >>>>> > > version: > >>>>> > > > >>> 9.7.0 > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: info : > >>>>> hostname: > >>>>> > > devuan > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: error : > >>>>> > > > >>> > > > >>> virFirewallApplyRuleDirect:518 : internal error: > >>>>> Failed to > >>>>> > > > >>> apply > >>>>> > > > >>> > > > >>> firewall rules /usr/sbin/iptables -w --table filter > >>>>> > > > >>> --list-rules: > >>>>> > > > >>> > > > >>> iptables: Failed to initialize nft: Protocol not > >>>>> supported > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.428+0000: 14725: error : > >>>>> > > > >>> > > > >>> virFirewallApplyRuleDirect:518 : internal error: > >>>>> Failed to > >>>>> > > > >>> apply > >>>>> > > > >>> > > firewall > >>>>> > > > >>> > > > >>> rules /usr/sbin/ip6tables -w --table filter > >>>>> --list-rules: > >>>>> > > > >>> ip6tables: > >>>>> > > > >>> > > Failed > >>>>> > > > >>> > > > >>> to initialize nft: Protocol not supported > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> On Tue, Aug 22, 2023 at 6:49 PM Pavel Hrdina < > >>>>> > > > >>> phrdina@xxxxxxxxxx> > >>>>> > > > >>> > > wrote: > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>>> On Tue, Aug 22, 2023 at 06:22:25PM +0200, Mario > >>>>> Marietto > >>>>> > > > >>> wrote: > >>>>> > > > >>> > > > >>>> > In your opinion should I remove virt-manager > >>>>> and all its > >>>>> > > > >>> > > dependencies > >>>>> > > > >>> > > > >>>> > before launching the recompilation ? > >>>>> > > > >>> > > > >>>> > >>>>> > > > >>> > > > >>>> I would say there is no need to do that if you > >>>>> install > >>>>> > > > >>> libvirt to > >>>>> > > > >>> > > > >>>> /usr/local as it should be separated from the > >>>>> libvirt > >>>>> > > > >>> installed by > >>>>> > > > >>> > > > >>>> package manager. > >>>>> > > > >>> > > > >>>> > >>>>> > > > >>> > > > >>>> Pavel > >>>>> > > > >>> > > > >>>> > >>>>> > > > >>> > > > >>>> > > >>>>> > > > >>> > > > >>>> > On Tue, Aug 22, 2023 at 6:05 PM Pavel Hrdina < > >>>>> > > > >>> phrdina@xxxxxxxxxx> > >>>>> > > > >>> > > > >>>> wrote: > >>>>> > > > >>> > > > >>>> > > >>>>> > > > >>> > > > >>>> > > On Tue, Aug 22, 2023 at 05:55:30PM +0200, > >>>>> Mario > >>>>> > > Marietto > >>>>> > > > >>> wrote: > >>>>> > > > >>> > > > >>>> > > > I have installed virt-manager and all its > >>>>> > > dependencies > >>>>> > > > >>> > > grabbing > >>>>> > > > >>> > > > >>>> the files > >>>>> > > > >>> > > > >>>> > > > from the devuan 5 repository. > >>>>> > > > >>> > > > >>>> > > > To recompile libvirt I need to acquire some > >>>>> basic > >>>>> > > > >>> information. > >>>>> > > > >>> > > > >>>> Which > >>>>> > > > >>> > > > >>>> > > > version should I compile ? Where is the > >>>>> source code > >>>>> > > > >>> located ? > >>>>> > > > >>> > > Do > >>>>> > > > >>> > > > >>>> you have > >>>>> > > > >>> > > > >>>> > > > some tutorial that explains the necessary > >>>>> steps to > >>>>> > > do > >>>>> > > > >>> it ? > >>>>> > > > >>> > > thanks. > >>>>> > > > >>> > > > >>>> > > > >>>>> > > > >>> > > > >>>> > > Everything can be found at > >>>>> https://libvirt.org/ not > >>>>> > > sure > >>>>> > > > >>> which > >>>>> > > > >>> > > > >>>> version > >>>>> > > > >>> > > > >>>> > > to pick, you can try latest upstream version > >>>>> but there > >>>>> > > > >>> might be > >>>>> > > > >>> > > some > >>>>> > > > >>> > > > >>>> > > dependencies missing in Devuan, if that > >>>>> happens you > >>>>> > > can > >>>>> > > > >>> > > fallback to > >>>>> > > > >>> > > > >>>> > > version that is provided by Devuan. > >>>>> > > > >>> > > > >>>> > > > >>>>> > > > >>> > > > >>>> > > For example this link has basic info on how > >>>>> to compile > >>>>> > > > >>> libvirt > >>>>> > > > >>> > > > >>>> > > https://libvirt.org/compiling.html and here > >>>>> you can > >>>>> > > find > >>>>> > > > >>> > > sources > >>>>> > > > >>> > > > >>>> > > to libvirt https://libvirt.org/downloads.html > >>>>> . > >>>>> > > > >>> > > > >>>> > > > >>>>> > > > >>> > > > >>>> > > Pavel > >>>>> > > > >>> > > > >>>> > > > >>>>> > > > >>> > > > >>>> > > > On Tue, Aug 22, 2023 at 5:50 PM Pavel > >>>>> Hrdina < > >>>>> > > > >>> > > phrdina@xxxxxxxxxx> > >>>>> > > > >>> > > > >>>> wrote: > >>>>> > > > >>> > > > >>>> > > > > >>>>> > > > >>> > > > >>>> > > > > On Tue, Aug 22, 2023 at 05:28:50PM +0200, > >>>>> Mario > >>>>> > > > >>> Marietto > >>>>> > > > >>> > > wrote: > >>>>> > > > >>> > > > >>>> > > > > > root@devuan:~# virsh domcapabilities > >>>>> --machine > >>>>> > > virt > >>>>> > > > >>> > > > >>>> --emulatorbin > >>>>> > > > >>> > > > >>>> > > > > > /usr/bin/qemu-system-arm > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > error: failed to get emulator > >>>>> capabilities > >>>>> > > > >>> > > > >>>> > > > > > error: KVM is not supported on this > >>>>> platform: > >>>>> > > > >>> Function not > >>>>> > > > >>> > > > >>>> > > implemented > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > BUT it's not true : > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > root@devuan:~# kvm-ok > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > INFO: /dev/kvm exists > >>>>> > > > >>> > > > >>>> > > > > > KVM acceleration can be used > >>>>> > > > >>> > > > >>>> > > > > > >>>>> > > > >>> > > > >>>> > > > > Are you using libvirt installed using > >>>>> package > >>>>> > > manager > >>>>> > > > >>> or > >>>>> > > > >>> > > some > >>>>> > > > >>> > > > >>>> libvirt > >>>>> > > > >>> > > > >>>> > > > > that you compiled yorself? Checking > >>>>> libvirt code > >>>>> > > this > >>>>> > > > >>> error > >>>>> > > > >>> > > only > >>>>> > > > >>> > > > >>>> > > happens > >>>>> > > > >>> > > > >>>> > > > > if libvirt was compiled without KVM, more > >>>>> > > > >>> specifically if > >>>>> > > > >>> > > header > >>>>> > > > >>> > > > >>>> > > > > `/usr/include/linux/kvm.h` doesn't exists. > >>>>> > > > >>> > > > >>>> > > > > > >>>>> > > > >>> > > > >>>> > > > > I was not able to find any details on > >>>>> Devuan > >>>>> > > distro > >>>>> > > > >>> so not > >>>>> > > > >>> > > sure > >>>>> > > > >>> > > > >>>> how > >>>>> > > > >>> > > > >>>> > > > > the libvirt package is compiled. You > >>>>> might need > >>>>> > > to try > >>>>> > > > >>> > > compiling > >>>>> > > > >>> > > > >>>> > > libvirt > >>>>> > > > >>> > > > >>>> > > > > yourself. > >>>>> > > > >>> > > > >>>> > > > > > >>>>> > > > >>> > > > >>>> > > > > Pavel > >>>>> > > > >>> > > > >>>> > > > > > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > On Tue, Aug 22, 2023 at 5:27 PM Mario > >>>>> Marietto < > >>>>> > > > >>> > > > >>>> > > marietto2008@xxxxxxxxx> > >>>>> > > > >>> > > > >>>> > > > > > wrote: > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > Oh sorry.... > >>>>> > > > >>> > > > >>>> > > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > On Tue, Aug 22, 2023 at 5:26 PM Mario > >>>>> > > Marietto < > >>>>> > > > >>> > > > >>>> > > marietto2008@xxxxxxxxx > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > wrote: > >>>>> > > > >>> > > > >>>> > > > > > > > >>>>> > > > >>> > > > >>>> > > > > > >> virsh domcapabilities --machine virt > >>>>> > > > >>> --emulatorbin > >>>>> > > > >>> > > > >>>> > > > > > >> /path/to/qemu-system-arm > >>>>> > > > >>> > > > >>>> > > > > > >> > >>>>> > > > >>> > > > >>>> > > > > > >> error: failed to get emulator > >>>>> capabilities > >>>>> > > > >>> > > > >>>> > > > > > >> error: Cannot check QEMU binary > >>>>> > > > >>> > > /path/to/qemu-system-arm: > >>>>> > > > >>> > > > >>>> No such > >>>>> > > > >>> > > > >>>> > > > > file or > >>>>> > > > >>> > > > >>>> > > > > > >> directory > >>>>> > > > >>> > > > >>>> > > > > > >> > >>>>> > > > >>> > > > >>>> > > > > > >> On Tue, Aug 22, 2023 at 4:49 PM > >>>>> Pavel Hrdina > >>>>> > > < > >>>>> > > > >>> > > > >>>> phrdina@xxxxxxxxxx> > >>>>> > > > >>> > > > >>>> > > > > wrote: > >>>>> > > > >>> > > > >>>> > > > > > >> > >>>>> > > > >>> > > > >>>> > > > > > >>> On Tue, Aug 22, 2023 at 04:05:09PM > >>>>> +0200, > >>>>> > > Mario > >>>>> > > > >>> > > Marietto > >>>>> > > > >>> > > > >>>> wrote: > >>>>> > > > >>> > > > >>>> > > > > > >>> > Where does libvirt want to find > >>>>> those > >>>>> > > files ? > >>>>> > > > >>> since > >>>>> > > > >>> > > the > >>>>> > > > >>> > > > >>>> qemu > >>>>> > > > >>> > > > >>>> > > 5.1 > >>>>> > > > >>> > > > >>>> > > > > > >>> > installation files have been > >>>>> placed under > >>>>> > > > >>> /usr/local > >>>>> > > > >>> > > > >>>> during the > >>>>> > > > >>> > > > >>>> > > > > command > >>>>> > > > >>> > > > >>>> > > > > > >>> > make install,I have also copied > >>>>> the > >>>>> > > firmware > >>>>> > > > >>> files > >>>>> > > > >>> > > in : > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > ls /usr/local/share/AAVMF > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF32_CODE.fd AAVMF_CODE.fd > >>>>> > > > >>> > > > >>>> AAVMF_CODE.snakeoil.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> AAVMF_VARS.ms.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF32_VARS.fd AAVMF_CODE.ms.fd > >>>>> > > > >>> AAVMF_VARS.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF_VARS.snakeoil.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > but they aren't still recognized. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> Downgrading libvirt would not help > >>>>> in this > >>>>> > > > >>> specific > >>>>> > > > >>> > > case. > >>>>> > > > >>> > > > >>>> Since > >>>>> > > > >>> > > > >>>> > > > > version > >>>>> > > > >>> > > > >>>> > > > > > >>> 5.2.0 libvirt uses firmware > >>>>> auto-selection. > >>>>> > > > >>> Libvirt is > >>>>> > > > >>> > > > >>>> looking > >>>>> > > > >>> > > > >>>> > > for > >>>>> > > > >>> > > > >>>> > > > > json > >>>>> > > > >>> > > > >>>> > > > > > >>> files describing available > >>>>> firmwares. It is > >>>>> > > > >>> > > documented in > >>>>> > > > >>> > > > >>>> QEMU > >>>>> > > > >>> > > > >>>> > > > > project > >>>>> > > > >>> > > > >>>> > > > > > >>> git repository in > >>>>> > > `docs/interop/firmware.json`, > >>>>> > > > >>> this > >>>>> > > > >>> > > > >>>> specific > >>>>> > > > >>> > > > >>>> > > section > >>>>> > > > >>> > > > >>>> > > > > > >>> describes where the json files > >>>>> should be > >>>>> > > placed: > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> # It is recommended to create > >>>>> firmware JSON > >>>>> > > > >>> files > >>>>> > > > >>> > > (each > >>>>> > > > >>> > > > >>>> > > containing a > >>>>> > > > >>> > > > >>>> > > > > > >>> # single @Firmware root element) > >>>>> with a > >>>>> > > > >>> double-digit > >>>>> > > > >>> > > > >>>> prefix, for > >>>>> > > > >>> > > > >>>> > > > > example > >>>>> > > > >>> > > > >>>> > > > > > >>> # "50-ovmf.json", > >>>>> "50-seabios-256k.json", > >>>>> > > etc, > >>>>> > > > >>> so they > >>>>> > > > >>> > > > >>>> can be > >>>>> > > > >>> > > > >>>> > > sorted > >>>>> > > > >>> > > > >>>> > > > > in > >>>>> > > > >>> > > > >>>> > > > > > >>> # predictable order. The firmware > >>>>> JSON files > >>>>> > > > >>> should be > >>>>> > > > >>> > > > >>>> searched > >>>>> > > > >>> > > > >>>> > > for > >>>>> > > > >>> > > > >>>> > > > > in > >>>>> > > > >>> > > > >>>> > > > > > >>> # three directories: > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> > > > >>> > > > >>>> > > > > > >>> # - /usr/share/qemu/firmware -- > >>>>> populated > >>>>> > > by > >>>>> > > > >>> > > > >>>> distro-provided > >>>>> > > > >>> > > > >>>> > > > > firmware > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> packages > >>>>> > > > >>> > > (XDG_DATA_DIRS > >>>>> > > > >>> > > > >>>> covers > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> > > /usr/share by > >>>>> > > > >>> > > default), > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> > > > >>> > > > >>>> > > > > > >>> # - /etc/qemu/firmware -- > >>>>> exclusively for > >>>>> > > > >>> sysadmins' > >>>>> > > > >>> > > > >>>> local > >>>>> > > > >>> > > > >>>> > > > > additions, > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> > > > >>> > > > >>>> > > > > > >>> # - > >>>>> $XDG_CONFIG_HOME/qemu/firmware -- > >>>>> > > > >>> exclusively > >>>>> > > > >>> > > for > >>>>> > > > >>> > > > >>>> per-user > >>>>> > > > >>> > > > >>>> > > > > local > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> > > > >>> additions > >>>>> > > > >>> > > > >>>> > > (XDG_CONFIG_HOME > >>>>> > > > >>> > > > >>>> > > > > > >>> # > >>>>> > > > >>> defaults to > >>>>> > > > >>> > > > >>>> > > $HOME/.config). > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> It doesn't matter where the *CODE* > >>>>> and > >>>>> > > *VARS* > >>>>> > > > >>> firmware > >>>>> > > > >>> > > > >>>> files are > >>>>> > > > >>> > > > >>>> > > > > placed > >>>>> > > > >>> > > > >>>> > > > > > >>> if the path to these files is > >>>>> correct in the > >>>>> > > > >>> json > >>>>> > > > >>> > > files > >>>>> > > > >>> > > > >>>> in one > >>>>> > > > >>> > > > >>>> > > of the > >>>>> > > > >>> > > > >>>> > > > > > >>> three directories. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> Looking at the qemu-efi-arm package > >>>>> it > >>>>> > > should > >>>>> > > > >>> install > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> /usr/share/AAVMF/AAVMF32_CODE.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> /usr/share/AAVMF/AAVMF32_VARS.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > /usr/share/qemu/firmware/60-edk2-arm.json > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> and that should be picked up > >>>>> correctly by > >>>>> > > > >>> libvirt. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> I don't know what machine types are > >>>>> > > available > >>>>> > > > >>> for > >>>>> > > > >>> > > 32bit > >>>>> > > > >>> > > > >>>> ARM, but > >>>>> > > > >>> > > > >>>> > > you > >>>>> > > > >>> > > > >>>> > > > > > >>> should be able to figure that out by > >>>>> > > running: > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> virsh capabilities | grep > >>>>> canonical > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> it will show only lines with > >>>>> machine types, > >>>>> > > but > >>>>> > > > >>> my > >>>>> > > > >>> > > guess > >>>>> > > > >>> > > > >>>> is on > >>>>> > > > >>> > > > >>>> > > arm > >>>>> > > > >>> > > > >>>> > > > > there > >>>>> > > > >>> > > > >>>> > > > > > >>> should be 'virt' machine type so > >>>>> running > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> virsh domcapabilities --machine > >>>>> virt > >>>>> > > > >>> --emulatorbin > >>>>> > > > >>> > > > >>>> > > > > > >>> /path/to/qemu-system-arm > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> where you should be able to see the > >>>>> firmware > >>>>> > > > >>> paths if > >>>>> > > > >>> > > > >>>> they are > >>>>> > > > >>> > > > >>>> > > > > correctly > >>>>> > > > >>> > > > >>>> > > > > > >>> detected by libvirt. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> Pavel > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >>> > On Tue, Aug 22, 2023 at 3:55 PM > >>>>> Mario > >>>>> > > > >>> Marietto < > >>>>> > > > >>> > > > >>>> > > > > marietto2008@xxxxxxxxx > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > wrote: > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > I've already did that : > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > # apt install qemu-efi-arm > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Reading package lists... Done > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Building dependency tree... Done > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Reading state information... > >>>>> Done > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu-efi-arm is already the > >>>>> newest > >>>>> > > version > >>>>> > > > >>> > > > >>>> (2022.11-6). > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu-efi-arm set to manually > >>>>> installed. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > if I don't get wrong,that > >>>>> package do the > >>>>> > > > >>> > > installation > >>>>> > > > >>> > > > >>>> of the > >>>>> > > > >>> > > > >>>> > > > > > >>> following > >>>>> > > > >>> > > > >>>> > > > > > >>> > > files : > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > root@devuan:/usr/share/AAVMF# > >>>>> ls > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF32_CODE.fd AAVMF_CODE.fd > >>>>> > > > >>> > > > >>>> AAVMF_CODE.snakeoil.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF_VARS.ms.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF32_VARS.fd > >>>>> AAVMF_CODE.ms.fd > >>>>> > > > >>> AAVMF_VARS.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF_VARS.snakeoil.fd > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > in my case they have been > >>>>> correctly > >>>>> > > placed > >>>>> > > > >>> under > >>>>> > > > >>> > > > >>>> > > /usr/share/AAVMF > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > I'm not sure that the problem > >>>>> is there. > >>>>> > > The > >>>>> > > > >>> error > >>>>> > > > >>> > > > >>>> message > >>>>> > > > >>> > > > >>>> > > talks > >>>>> > > > >>> > > > >>>> > > > > > >>> about the > >>>>> > > > >>> > > > >>>> > > > > > >>> > > libvirt version that could be > >>>>> wrong. > >>>>> > > What > >>>>> > > > >>> about > >>>>> > > > >>> > > if I > >>>>> > > > >>> > > > >>>> > > retrocede > >>>>> > > > >>> > > > >>>> > > > > > >>> libirt 7.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > > to 6.9 for example. Why 6.9 ? > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > As you can read below,it > >>>>> supports qemu > >>>>> > > 5.0 > >>>>> > > > >>> and > >>>>> > > > >>> > > > >>>> newer... > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > v6.9.0 (2020-11-02) > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *New features* > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > nodedev: Add support for > >>>>> channel > >>>>> > > > >>> subsystem > >>>>> > > > >>> > > (CSS) > >>>>> > > > >>> > > > >>>> > > devices on > >>>>> > > > >>> > > > >>>> > > > > > >>> S390 > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > A CSS device is > >>>>> represented as a > >>>>> > > > >>> parent > >>>>> > > > >>> > > device > >>>>> > > > >>> > > > >>>> of a CCW > >>>>> > > > >>> > > > >>>> > > > > device. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > This support allows to > >>>>> create > >>>>> > > vfio-ccw > >>>>> > > > >>> > > mediated > >>>>> > > > >>> > > > >>>> devices > >>>>> > > > >>> > > > >>>> > > > > with > >>>>> > > > >>> > > > >>>> > > > > > >>> > > virNodeDeviceCreateXML(). > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Implement memory > >>>>> failure > >>>>> > > event > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > New event is implemented > >>>>> that is > >>>>> > > > >>> emitted > >>>>> > > > >>> > > > >>>> whenever a > >>>>> > > > >>> > > > >>>> > > guest > >>>>> > > > >>> > > > >>>> > > > > > >>> > > encounters a memory > >>>>> failure. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Implement support > >>>>> for > >>>>> > > > >>> <transient/> > >>>>> > > > >>> > > disks > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > VMs based on the QEMU > >>>>> hypervisor > >>>>> > > now > >>>>> > > > >>> can use > >>>>> > > > >>> > > > >>>> > > <transient/> > >>>>> > > > >>> > > > >>>> > > > > > >>> option > >>>>> > > > >>> > > > >>>> > > > > > >>> > > for local file-backed > >>>>> disks to > >>>>> > > > >>> configure a > >>>>> > > > >>> > > disk > >>>>> > > > >>> > > > >>>> which > >>>>> > > > >>> > > > >>>> > > > > discards > >>>>> > > > >>> > > > >>>> > > > > > >>> changes made > >>>>> > > > >>> > > > >>>> > > > > > >>> > > to it while the VM was > >>>>> active. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > hyperv: implement new APIs > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > The > >>>>> virConnectGetCapabilities(), > >>>>> > > > >>> > > > >>>> > > virConnectGetMaxVcpus(), > >>>>> > > > >>> > > > >>>> > > > > > >>> > > virConnectGetVersion(), > >>>>> > > > >>> > > virDomainGetAutostart(), > >>>>> > > > >>> > > > >>>> > > > > > >>> > > virDomainSetAutostart(), > >>>>> > > > >>> > > virNodeGetFreeMemory(), > >>>>> > > > >>> > > > >>>> > > > > > >>> virDomainReboot(), > >>>>> > > > >>> > > > >>>> > > > > > >>> > > virDomainReset(), > >>>>> > > > >>> virDomainShutdown(), and > >>>>> > > > >>> > > > >>>> > > > > > >>> virDomainShutdownFlags() > >>>>> > > > >>> > > > >>>> > > > > > >>> > > APIs have been > >>>>> implemented in the > >>>>> > > > >>> Hyper-V > >>>>> > > > >>> > > > >>>> driver. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > bhyve: implement virtio-9p > >>>>> > > filesystem > >>>>> > > > >>> > > support > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Implement virito-9p shared > >>>>> > > filesystem > >>>>> > > > >>> using > >>>>> > > > >>> > > the > >>>>> > > > >>> > > > >>>> > > > > <filesystem/> > >>>>> > > > >>> > > > >>>> > > > > > >>> > > element. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Add support for > >>>>> vDPA network > >>>>> > > > >>> devices. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > VMs using the QEMU > >>>>> hypervisor can > >>>>> > > now > >>>>> > > > >>> > > specify > >>>>> > > > >>> > > > >>>> vDPA > >>>>> > > > >>> > > > >>>> > > network > >>>>> > > > >>> > > > >>>> > > > > > >>> devices > >>>>> > > > >>> > > > >>>> > > > > > >>> > > using <interface > >>>>> type='vdpa'>. The > >>>>> > > > >>> node > >>>>> > > > >>> > > device > >>>>> > > > >>> > > > >>>> APIs > >>>>> > > > >>> > > > >>>> > > also > >>>>> > > > >>> > > > >>>> > > > > now > >>>>> > > > >>> > > > >>>> > > > > > >>> list > >>>>> > > > >>> > > > >>>> > > > > > >>> > > and provide XML > >>>>> descriptions for > >>>>> > > vDPA > >>>>> > > > >>> > > devices. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > cpu_map: Add EPYC-Rome > >>>>> CPU model > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *It's supported in QEMU > >>>>> 5.0.0 and > >>>>> > > > >>> newer.* > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > cpu: Add a flag for XML > >>>>> > > validation in > >>>>> > > > >>> CPU > >>>>> > > > >>> > > > >>>> comparison > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > The virConnectCompareCPU > >>>>> and > >>>>> > > > >>> > > > >>>> > > virConnectCompareHypervisorCPU > >>>>> > > > >>> > > > >>>> > > > > > >>> API now > >>>>> > > > >>> > > > >>>> > > > > > >>> > > support the > >>>>> > > > >>> > > > >>>> VIR_CONNECT_COMPARE_CPU_VALIDATE_XML flag, > >>>>> > > > >>> > > > >>>> > > > > which > >>>>> > > > >>> > > > >>>> > > > > > >>> > > enables XML validation. > >>>>> For virsh, > >>>>> > > > >>> this > >>>>> > > > >>> > > feature > >>>>> > > > >>> > > > >>>> is > >>>>> > > > >>> > > > >>>> > > enabled > >>>>> > > > >>> > > > >>>> > > > > by > >>>>> > > > >>> > > > >>>> > > > > > >>> passing the > >>>>> > > > >>> > > > >>>> > > > > > >>> > > --validate option to the > >>>>> > > cpu-compare > >>>>> > > > >>> and > >>>>> > > > >>> > > > >>>> > > > > hypervisor-cpu-compare > >>>>> > > > >>> > > > >>>> > > > > > >>> > > subcommands. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Introduce > >>>>> virtio-balloon > >>>>> > > free > >>>>> > > > >>> page > >>>>> > > > >>> > > > >>>> reporting > >>>>> > > > >>> > > > >>>> > > feature > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Introduce the optional > >>>>> attribute > >>>>> > > > >>> > > > >>>> free-page-reporting > >>>>> > > > >>> > > > >>>> > > for > >>>>> > > > >>> > > > >>>> > > > > virtio > >>>>> > > > >>> > > > >>>> > > > > > >>> > > memballoon device. It > >>>>> > > > >>> enables/disables the > >>>>> > > > >>> > > > >>>> ability of > >>>>> > > > >>> > > > >>>> > > the > >>>>> > > > >>> > > > >>>> > > > > QEMU > >>>>> > > > >>> > > > >>>> > > > > > >>> virtio > >>>>> > > > >>> > > > >>>> > > > > > >>> > > memory balloon to return > >>>>> unused > >>>>> > > pages > >>>>> > > > >>> back > >>>>> > > > >>> > > to > >>>>> > > > >>> > > > >>>> the > >>>>> > > > >>> > > > >>>> > > > > hypervisor. > >>>>> > > > >>> > > > >>>> > > > > > >>> QEMU 5.1 and > >>>>> > > > >>> > > > >>>> > > > > > >>> > > newer support this > >>>>> feature. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *Improvements* > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Make 'cbitpos' & > >>>>> > > > >>> 'reducedPhysBits' > >>>>> > > > >>> > > attrs > >>>>> > > > >>> > > > >>>> optional > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Libvirt probes the > >>>>> underlying > >>>>> > > > >>> platform in > >>>>> > > > >>> > > order > >>>>> > > > >>> > > > >>>> to > >>>>> > > > >>> > > > >>>> > > fill in > >>>>> > > > >>> > > > >>>> > > > > > >>> these > >>>>> > > > >>> > > > >>>> > > > > > >>> > > SEV attributes > >>>>> automatically > >>>>> > > before > >>>>> > > > >>> > > launching a > >>>>> > > > >>> > > > >>>> guest. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > util: support device stats > >>>>> > > collection > >>>>> > > > >>> for > >>>>> > > > >>> > > > >>>> SR-IOV VF > >>>>> > > > >>> > > > >>>> > > hostdev > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > For SR-IOV VF hostdevs, > >>>>> libvirt > >>>>> > > now > >>>>> > > > >>> supports > >>>>> > > > >>> > > > >>>> retrieving > >>>>> > > > >>> > > > >>>> > > > > device > >>>>> > > > >>> > > > >>>> > > > > > >>> > > traffic stats via the > >>>>> > > > >>> > > virDomainInterfaceStats > >>>>> > > > >>> > > > >>>> API and > >>>>> > > > >>> > > > >>>> > > virsh > >>>>> > > > >>> > > > >>>> > > > > > >>> > > domifstat. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > logging: Allow disabling > >>>>> log > >>>>> > > rollover > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Set max_len=0 in > >>>>> virtlogd.conf to > >>>>> > > > >>> disable > >>>>> > > > >>> > > log > >>>>> > > > >>> > > > >>>> rollover. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Set noqueue qdisc > >>>>> for TAP > >>>>> > > > >>> devices > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Set noqueue instead of > >>>>> the former > >>>>> > > > >>> pfifo_fast > >>>>> > > > >>> > > > >>>> queue > >>>>> > > > >>> > > > >>>> > > > > discipline > >>>>> > > > >>> > > > >>>> > > > > > >>> for > >>>>> > > > >>> > > > >>>> > > > > > >>> > > TAP devices. It will avoid > >>>>> > > needless > >>>>> > > > >>> cost of > >>>>> > > > >>> > > > >>>> host CPU > >>>>> > > > >>> > > > >>>> > > cycles > >>>>> > > > >>> > > > >>>> > > > > > >>> and thus > >>>>> > > > >>> > > > >>>> > > > > > >>> > > improve performance. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: virtiofs can be > >>>>> used without > >>>>> > > > >>> NUMA > >>>>> > > > >>> > > nodes > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Virtiofs is supported for > >>>>> the VM > >>>>> > > > >>> without > >>>>> > > > >>> > > NUMA > >>>>> > > > >>> > > > >>>> nodes but > >>>>> > > > >>> > > > >>>> > > > > > >>> configured > >>>>> > > > >>> > > > >>>> > > > > > >>> > > with shared memory. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *Bug fixes* > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > hyperv: ensure WQL > >>>>> queries work > >>>>> > > in all > >>>>> > > > >>> > > locales > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Relying on the > >>>>> "Description" field > >>>>> > > > >>> caused > >>>>> > > > >>> > > > >>>> queries to > >>>>> > > > >>> > > > >>>> > > fail > >>>>> > > > >>> > > > >>>> > > > > on > >>>>> > > > >>> > > > >>>> > > > > > >>> > > non-"en-US" systems. The > >>>>> queries > >>>>> > > have > >>>>> > > > >>> been > >>>>> > > > >>> > > > >>>> updated to > >>>>> > > > >>> > > > >>>> > > avoid > >>>>> > > > >>> > > > >>>> > > > > > >>> using localized > >>>>> > > > >>> > > > >>>> > > > > > >>> > > strings. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > - > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > rpc: Fix virt-ssh-helper > >>>>> detection > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > libvirt 6.8.0 failed to > >>>>> correctly > >>>>> > > > >>> detect the > >>>>> > > > >>> > > > >>>> > > availability > >>>>> > > > >>> > > > >>>> > > > > of > >>>>> > > > >>> > > > >>>> > > > > > >>> the > >>>>> > > > >>> > > > >>>> > > > > > >>> > > new virt-ssh-helper > >>>>> command on the > >>>>> > > > >>> remote > >>>>> > > > >>> > > host, > >>>>> > > > >>> > > > >>>> and > >>>>> > > > >>> > > > >>>> > > thus > >>>>> > > > >>> > > > >>>> > > > > always > >>>>> > > > >>> > > > >>>> > > > > > >>> > > used the fallback > >>>>> instead; this > >>>>> > > has > >>>>> > > > >>> now been > >>>>> > > > >>> > > > >>>> fixed. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > What do you think ? Can you > >>>>> share some > >>>>> > > > >>> > > documentation > >>>>> > > > >>> > > > >>>> about > >>>>> > > > >>> > > > >>>> > > how to > >>>>> > > > >>> > > > >>>> > > > > > >>> > > recompile an older version of > >>>>> libvirt > >>>>> > > from > >>>>> > > > >>> source > >>>>> > > > >>> > > > >>>> code ? > >>>>> > > > >>> > > > >>>> > > thanks. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > On Tue, Aug 22, 2023 at 3:35 PM > >>>>> Pavel > >>>>> > > > >>> Hrdina < > >>>>> > > > >>> > > > >>>> > > phrdina@xxxxxxxxxx > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > >>> wrote: > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> On Tue, Aug 22, 2023 at > >>>>> 02:49:05PM > >>>>> > > +0200, > >>>>> > > > >>> Mario > >>>>> > > > >>> > > > >>>> Marietto > >>>>> > > > >>> > > > >>>> > > wrote: > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Hello to everyone. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > I'm trying to use qemu 5.1 > >>>>> with > >>>>> > > > >>> virt-manager > >>>>> > > > >>> > > and > >>>>> > > > >>> > > > >>>> libvirt > >>>>> > > > >>> > > > >>>> > > on > >>>>> > > > >>> > > > >>>> > > > > my ARM > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > chromebook (armhf 32 bit > >>>>> cpu) running > >>>>> > > > >>> with > >>>>> > > > >>> > > Devuan > >>>>> > > > >>> > > > >>>> 4 as > >>>>> > > > >>> > > > >>>> > > host > >>>>> > > > >>> > > > >>>> > > > > o.s. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > By default it uses qemu and > >>>>> its > >>>>> > > > >>> > > > >>>> dependencies,version 5.2. > >>>>> > > > >>> > > > >>>> > > I > >>>>> > > > >>> > > > >>>> > > > > > >>> remember > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> that I > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > can't use qemu 5.2,because > >>>>> it doesn't > >>>>> > > > >>> have any > >>>>> > > > >>> > > > >>>> support for > >>>>> > > > >>> > > > >>>> > > > > KVM as > >>>>> > > > >>> > > > >>>> > > > > > >>> you > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> can > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > read here : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > >>>>> > > > >>> > > > >>>>> > > > >>>>> https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02074.html > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > For this reason,I've > >>>>> compiled qemu > >>>>> > > 5.1 > >>>>> > > > >>> from > >>>>> > > > >>> > > > >>>> source. Below > >>>>> > > > >>> > > > >>>> > > I > >>>>> > > > >>> > > > >>>> > > > > shown > >>>>> > > > >>> > > > >>>> > > > > > >>> how I > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > have configured everything > >>>>> such as a > >>>>> > > > >>> little > >>>>> > > > >>> > > piece > >>>>> > > > >>> > > > >>>> of > >>>>> > > > >>> > > > >>>> > > > > compilation > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> messages : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # apt install libgtk-3-dev > >>>>> > > libpulse-dev > >>>>> > > > >>> > > libgbm-dev > >>>>> > > > >>> > > > >>>> > > > > > >>> libspice-protocol-dev > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > libspice-server-dev > >>>>> libusb-1.0-0-dev > >>>>> > > > >>> > > libepoxy-dev > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # cp > >>>>> > > > >>> > > > >>>> > >>>>> /root/Desktop/qemu-v5.1.0/arm-softmmu/qemu-system-arm > >>>>> > > > >>> > > > >>>> > > > > > >>> /usr/bin > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # CFLAGS=-Wno-error > >>>>> ./configure > >>>>> > > > >>> > > > >>>> > > --target-list=x86_64-softmmu > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> --enable-opengl > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > --enable-gtk --enable-kvm > >>>>> > > > >>> --enable-guest-agent > >>>>> > > > >>> > > > >>>> > > --enable-spice > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> --audio-drv- > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > list="oss pa" --enable-libusb > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > A little piece of the log > >>>>> messages > >>>>> > > that > >>>>> > > > >>> I've > >>>>> > > > >>> > > got > >>>>> > > > >>> > > > >>>> from the > >>>>> > > > >>> > > > >>>> > > > > > >>> compilation of > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > qemu 5.1 : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> https://pastebin.ubuntu.com/p/8DYfgPvhXy/ > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > These are the resulting > >>>>> versions of > >>>>> > > my > >>>>> > > > >>> > > frankenstein > >>>>> > > > >>> > > > >>>> > > operation > >>>>> > > > >>> > > > >>>> > > > > : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # virsh version > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against library: > >>>>> libvirt > >>>>> > > 7.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library: libvirt 7.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU 7.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor: QEMU > >>>>> 5.1.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > At this point I ran > >>>>> virt-manager. It > >>>>> > > has > >>>>> > > > >>> been > >>>>> > > > >>> > > able > >>>>> > > > >>> > > > >>>> to > >>>>> > > > >>> > > > >>>> > > detect > >>>>> > > > >>> > > > >>>> > > > > > >>> qemu,but I > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> get > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > the following error : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Warning : Failed to set up > >>>>> UEFI. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > The Libvirt version does not > >>>>> support > >>>>> > > > >>> UEFI. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Install options are limited. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > (I have also tried upgrading > >>>>> devuan 4 > >>>>> > > > >>> with > >>>>> > > > >>> > > devuan > >>>>> > > > >>> > > > >>>> 5 and > >>>>> > > > >>> > > > >>>> > > I've > >>>>> > > > >>> > > > >>>> > > > > got > >>>>> > > > >>> > > > >>>> > > > > > >>> the > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> same > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > error : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> You most likely need to install > >>>>> > > > >>> qemu-efi-arm > >>>>> > > > >>> > > package > >>>>> > > > >>> > > > >>>> which > >>>>> > > > >>> > > > >>>> > > > > should > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> provide 32bit arm firmware > >>>>> files. The > >>>>> > > > >>> package > >>>>> > > > >>> > > name > >>>>> > > > >>> > > > >>>> is a bit > >>>>> > > > >>> > > > >>>> > > > > > >>> confusing > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> as it doesn't originate from > >>>>> qemu > >>>>> > > project, > >>>>> > > > >>> it is > >>>>> > > > >>> > > > >>>> from edk2 > >>>>> > > > >>> > > > >>>> > > > > project. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> Without this package libvirt > >>>>> most > >>>>> > > likely > >>>>> > > > >>> doesn't > >>>>> > > > >>> > > > >>>> report any > >>>>> > > > >>> > > > >>>> > > efi > >>>>> > > > >>> > > > >>>> > > > > > >>> files > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> and that's what causes the > >>>>> error you > >>>>> > > are > >>>>> > > > >>> hitting. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> Pavel > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > root@devuan:/usr/bin# virsh > >>>>> version > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against library: > >>>>> libvirt > >>>>> > > 9.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library: libvirt 9.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU 9.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor: QEMU > >>>>> 5.1.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > If I change qemu-system-arm > >>>>> vers. 5.1 > >>>>> > > > >>> with > >>>>> > > > >>> > > > >>>> qemu-system-arm > >>>>> > > > >>> > > > >>>> > > > > > >>> 5.2,the error > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > disappears. So,it seems that > >>>>> libvirt > >>>>> > > > >>> does not > >>>>> > > > >>> > > > >>>> accept > >>>>> > > > >>> > > > >>>> > > > > > >>> qemu-system-arm > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> vers. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > 5.1 or maybe any version > >>>>> lower than > >>>>> > > > >>> 5.2,I don't > >>>>> > > > >>> > > > >>>> know. But > >>>>> > > > >>> > > > >>>> > > as > >>>>> > > > >>> > > > >>>> > > > > I've > >>>>> > > > >>> > > > >>>> > > > > > >>> said,I > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > can't use any version of qemu > >>>>> > > greater or > >>>>> > > > >>> equal > >>>>> > > > >>> > > to > >>>>> > > > >>> > > > >>>> 5.2 on > >>>>> > > > >>> > > > >>>> > > my > >>>>> > > > >>> > > > >>>> > > > > > >>> setup. And I > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > want to use virt-manager and > >>>>> libvirt > >>>>> > > > >>> because I > >>>>> > > > >>> > > > >>>> find these > >>>>> > > > >>> > > > >>>> > > > > tools > >>>>> > > > >>> > > > >>>> > > > > > >>> very > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > comfortable instead of using > >>>>> the > >>>>> > > "raw" > >>>>> > > > >>> qemu > >>>>> > > > >>> > > > >>>> parameters. Is > >>>>> > > > >>> > > > >>>> > > > > there a > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > workaround ? Maybe I can > >>>>> recompile > >>>>> > > > >>> virt-manager > >>>>> > > > >>> > > > >>>> and / or > >>>>> > > > >>> > > > >>>> > > > > libvirt > >>>>> > > > >>> > > > >>>> > > > > > >>> from > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> the > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > source code ? but how ? Do > >>>>> you think > >>>>> > > > >>> that it > >>>>> > > > >>> > > could > >>>>> > > > >>> > > > >>>> work > >>>>> > > > >>> > > > >>>> > > if I > >>>>> > > > >>> > > > >>>> > > > > use > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> something > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > like this (if it exists and > >>>>> if it > >>>>> > > can be > >>>>> > > > >>> > > reached > >>>>> > > > >>> > > > >>>> in some > >>>>> > > > >>> > > > >>>> > > way) > >>>>> > > > >>> > > > >>>> > > > > : > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against library: > >>>>> libvirt > >>>>> > > 5.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library: libvirt 5.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU 5.0.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor: QEMU > >>>>> 5.1.0 > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > thanks. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > -- > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Mario. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -- > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Mario. > >>>>> > > > >>> > > > >>>> > > > > > >>> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > >>>>> > > > >>> > > > >>>> > > > > > >>> > -- > >>>>> > > > >>> > > > >>>> > > > > > >>> > Mario. > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>>>> > > > >>> > > > >>>> > > > > > >> > >>>>> > > > >>> > > > >>>> > > > > > >> > >>>>> > > > >>> > > > >>>> > > > > > >> -- > >>>>> > > > >>> > > > >>>> > > > > > >> Mario. > >>>>> > > > >>> > > > >>>> > > > > > >> > >>>>> > > > >>> > > > >>>> > > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > -- > >>>>> > > > >>> > > > >>>> > > > > > > Mario. > >>>>> > > > >>> > > > >>>> > > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > > >>>>> > > > >>> > > > >>>> > > > > > -- > >>>>> > > > >>> > > > >>>> > > > > > Mario. > >>>>> > > > >>> > > > >>>> > > > > > >>>>> > > > >>> > > > >>>> > > > > >>>>> > > > >>> > > > >>>> > > > > >>>>> > > > >>> > > > >>>> > > > -- > >>>>> > > > >>> > > > >>>> > > > Mario. > >>>>> > > > >>> > > > >>>> > > > >>>>> > > > >>> > > > >>>> > > >>>>> > > > >>> > > > >>>> > > >>>>> > > > >>> > > > >>>> > -- > >>>>> > > > >>> > > > >>>> > Mario. > >>>>> > > > >>> > > > >>>> > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >>> -- > >>>>> > > > >>> > > > >>> Mario. > >>>>> > > > >>> > > > >>> > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > >> -- > >>>>> > > > >>> > > > >> Mario. > >>>>> > > > >>> > > > >> > >>>>> > > > >>> > > > > > >>>>> > > > >>> > > > > > >>>>> > > > >>> > > > > -- > >>>>> > > > >>> > > > > Mario. > >>>>> > > > >>> > > > > > >>>>> > > > >>> > > > > >>>>> > > > >>> > > > > >>>>> > > > >>> > > > -- > >>>>> > > > >>> > > > Mario. > >>>>> > > > >>> > > > >>>>> > > > >>> > > > >>>>> > > > >>> > > > >>>>> > > > >>> > > >>>>> > > > >>> > -- > >>>>> > > > >>> > Mario. > >>>>> > > > >>> > >>>>> > > > >> > >>>>> > > > >> > >>>>> > > > >> -- > >>>>> > > > >> Mario. > >>>>> > > > >> > >>>>> > > > > > >>>>> > > > > > >>>>> > > > > -- > >>>>> > > > > Mario. > >>>>> > > > > > >>>>> > > > > >>>>> > > > > >>>>> > > > -- > >>>>> > > > Mario. > >>>>> > > > >>>>> > > >>>>> > > >>>>> > -- > >>>>> > Mario. > >>>>> > >>>> > >>>> > >>>> -- > >>>> Mario. > >>>> > >>> > >>> > >>> -- > >>> Mario. > >>> > >> > >> > >> -- > >> Mario. > >> > > > > > > -- > > Mario. > > > > > -- > Mario.
Attachment:
signature.asc
Description: PGP signature
