Hi Valerio,
not sure you already figured it out. To me 'source bridge="virbr0"' looks to me like the guest is run w/ default libvirt network for NAT - https://wiki.libvirt.org/page/Networking#NAT_forwarding_.28aka_.22virtual_networks.22.29
Libvirt uses dnsmasq for DHCP. 122.1 is the default gateway, you can find more info under that link and examples of alternative network definitions at https://libvirt.org/formatnetwork.html
On Mon, Jun 27, 2022 at 4:00 PM Valerio Pachera <sirio81@xxxxxxxxx> wrote:
Hi, I'm running virt-manager 2.2.1 on a ubuntu 20.04 (kde neon).In stalled a ubuntu 22.04 as guest.The vm nic is configured using bridge<interface type="bridge">
<mac address="52:54:00:6f:27:8e"/>
<source bridge="virbr0"/>
<target dev="vnet0"/>
<model type="rtl8139"/>
<alias name="net0"/>
<address type="pci" domain="0x0000" bus="0x02" slot="0x01" function="0x0"/>
</interface>I cloned the vm (with a differe mac address).<interface type="bridge">
<mac address="52:54:00:25:c7:4a"/>
<source bridge="virbr0"/>
<model type="rtl8139"/>
<address type="pci" domain="0x0000" bus="0x02" slot="0x01" function="0x0"/>
</interface>When I run the first vm I notice it gets and IP from DHCP and this is my first surprise.It gets the ip 192.168.122.159.1) What is acting as DHCP server?brctl show
bridge name bridge id STP enabled interfaces
virbr0 8000.52540037d765 yes virbr0-nic
vnet0
If i run the second guest, it receive the very same ip!
As result, I get an ip conflict.arping -d 192.168.122.159
ARPING 192.168.122.159
42 bytes from 52:54:00:25:c7:4a (192.168.122.159): index=0 time=397.843 usec
42 bytes from 52:54:00:6f:27:8e (192.168.122.159): index=1 time=671.916 usec
2) I notice the rbidge has the ip 192.168.122.1. Is possible to configure it? I also notice I can't edit bridge settings from the kde netwrk manager.3) I expected to have by network card as member of the bridge2: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 98:e7:43:9a:fe:09 brd ff:ff:ff:ff:ff:ff
altname enp0s31f6but it's not.
How shall I add it?
