Very likely has to do with the 'kvm not available' bit, but of course it shouldn't segfault in that case. Anything interesting in 'dmesg | grep -i kvm' ? - Cole On 10/15/2014 07:49 AM, Digimer wrote: > Side note; > > I upgraded to RHEL 6.6 today and got the same segfault. > > digimer > > On 14/10/14 04:39 PM, Digimer wrote: >> Hi all, >> >> I've installed SCO V a few times before on EL6.5 (both CentOS and >> RHEL proper). Today though, on CentOS 6.5, I've getting a segfault >> error. I was hoping someone here might have some insight. It's worth >> nothing that I successfully installed a CentOS 6.5 VM immediately after >> without issue. I also tried installing SCO on both nodes of a 2-node >> cluster, identically configured, and got a segfault on both machines. >> >> I'm wondering if this is related: >> >> ==== >> Tue, 14 Oct 2014 16:29:58 WARNING KVM acceleration not available, using >> 'qemu' >> ==== >> >> As the virtualization extensions are enabled in the BIOS (emphasis >> mine): >> >> ==== >> # egrep '(vmx|svm)' /proc/cpuinfo >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca >> cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall >> nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good >> xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl >> **vmx** smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic >> popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb >> xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid fsgsbase smep >> erms >> ==== >> >> Provision call: >> >> ==== >> virt-install --connect qemu:///system \ >> --name vm01-sco5 \ >> --virt-type qemu \ >> --ram 4096 \ >> --arch i686 \ >> --vcpus 2 \ >> --cdrom '/shared/files/Base_OS_Installation.iso' \ >> --os-variant generic \ >> --video vga \ >> --network bridge=vbr2,model=pcnet \ >> --disk path=/dev/fea-c01n01_vg0/vm01-sco5_0,bus=ide \ >> --graphics vnc --debug >> ==== >> >> Shell output: >> >> ==== >> Tue, 14 Oct 2014 16:29:58 DEBUG Launched with command line: >> /usr/sbin/virt-install --connect qemu:///system --name vm01-sco5 >> --virt-type qemu --ram 4096 --arch i686 --vcpus 2 --cdrom >> /shared/files/Base_OS_Installation.iso --os-variant generic --video vga >> --network bridge=vbr2,model=pcnet --disk >> path=/dev/fea-c01n01_vg0/vm01-sco5_0,bus=ide --graphics vnc --debug >> Tue, 14 Oct 2014 16:29:58 DEBUG Requesting libvirt URI qemu:///system >> Tue, 14 Oct 2014 16:29:58 DEBUG Received libvirt URI qemu:///system >> Tue, 14 Oct 2014 16:29:58 DEBUG Requesting virt method 'default', hv >> type 'qemu'. >> Tue, 14 Oct 2014 16:29:58 WARNING KVM acceleration not available, using >> 'qemu' >> Tue, 14 Oct 2014 16:29:58 DEBUG Received virt method 'hvm' >> Tue, 14 Oct 2014 16:29:58 DEBUG Hypervisor name is 'qemu' >> Tue, 14 Oct 2014 16:29:58 DEBUG Setting os type to 'other' for >> variant 'generic' >> Tue, 14 Oct 2014 16:29:58 DEBUG DistroInstaller location is a local >> file/path: /shared/files/Base_OS_Installation.iso >> Tue, 14 Oct 2014 16:29:58 DEBUG Guest.has_install_phase: True >> >> Starting install... >> Tue, 14 Oct 2014 16:29:58 DEBUG Generated install XML: >> <domain type='qemu'> >> <name>vm01-sco5</name> >> <uuid>97eab5ff-5631-f733-93c5-975673b42b34</uuid> >> <memory>4194304</memory> >> <currentMemory>4194304</currentMemory> >> <vcpu>2</vcpu> >> <os> >> <type arch='i686'>hvm</type> >> <boot dev='cdrom'/> >> <boot dev='hd'/> >> </os> >> <features> >> <acpi/><apic/><pae/> >> </features> >> <clock offset="utc"/> >> <on_poweroff>destroy</on_poweroff> >> <on_reboot>destroy</on_reboot> >> <on_crash>destroy</on_crash> >> <devices> >> <emulator>/usr/libexec/qemu-kvm</emulator> >> <disk type='block' device='disk'> >> <driver name='qemu' cache='none' io='native'/> >> <source dev='/dev/fea-c01n01_vg0/vm01-sco5_0'/> >> <target dev='hda' bus='ide'/> >> </disk> >> <disk type='file' device='cdrom'> >> <driver name='qemu'/> >> <source file='/shared/files/Base_OS_Installation.iso'/> >> <target dev='hdc' bus='ide'/> >> <readonly/> >> </disk> >> <interface type='bridge'> >> <source bridge='vbr2'/> >> <mac address='52:54:00:dc:39:71'/> >> <model type='pcnet'/> >> </interface> >> <input type='mouse' bus='ps2'/> >> <graphics type='vnc' port='-1'/> >> <console type='pty'/> >> <video> >> <model type='vga'/> >> </video> >> </devices> >> </domain> >> >> Tue, 14 Oct 2014 16:29:58 DEBUG Generated boot XML: >> <domain type='qemu'> >> <name>vm01-sco5</name> >> <uuid>97eab5ff-5631-f733-93c5-975673b42b34</uuid> >> <memory>4194304</memory> >> <currentMemory>4194304</currentMemory> >> <vcpu>2</vcpu> >> <os> >> <type arch='i686'>hvm</type> >> <boot dev='hd'/> >> </os> >> <features> >> <acpi/><apic/><pae/> >> </features> >> <clock offset="utc"/> >> <on_poweroff>destroy</on_poweroff> >> <on_reboot>restart</on_reboot> >> <on_crash>restart</on_crash> >> <devices> >> <emulator>/usr/libexec/qemu-kvm</emulator> >> <disk type='block' device='disk'> >> <driver name='qemu' cache='none' io='native'/> >> <source dev='/dev/fea-c01n01_vg0/vm01-sco5_0'/> >> <target dev='hda' bus='ide'/> >> </disk> >> <disk type='block' device='cdrom'> >> <target dev='hdc' bus='ide'/> >> <readonly/> >> </disk> >> <interface type='bridge'> >> <source bridge='vbr2'/> >> <mac address='52:54:00:dc:39:71'/> >> <model type='pcnet'/> >> </interface> >> <input type='mouse' bus='ps2'/> >> <graphics type='vnc' port='-1'/> >> <console type='pty'/> >> <video> >> <model type='vga'/> >> </video> >> </devices> >> </domain> >> >> Creating domain... | 0 B 00:00 >> Tue, 14 Oct 2014 16:29:59 DEBUG Started guest, connecting to console >> if requested >> Tue, 14 Oct 2014 16:29:59 DEBUG Launching virt-viewer for graphics >> type 'vnc' >> Tue, 14 Oct 2014 16:29:59 DEBUG Running: /usr/bin/virt-viewer >> --connect qemu:///system --wait 2 >> Cannot open display: >> Run 'virt-viewer --help' to see a full list of available command line >> options >> Tue, 14 Oct 2014 16:29:59 DEBUG XML fetched from libvirt object: >> <domain type='qemu'> >> <name>vm01-sco5</name> >> <uuid>97eab5ff-5631-f733-93c5-975673b42b34</uuid> >> <memory unit='KiB'>4194304</memory> >> <currentMemory unit='KiB'>4194304</currentMemory> >> <vcpu placement='static'>2</vcpu> >> <os> >> <type arch='i686' machine='rhel6.5.0'>hvm</type> >> <boot dev='hd'/> >> </os> >> <features> >> <acpi/> >> <apic/> >> <pae/> >> </features> >> <clock offset='utc'/> >> <on_poweroff>destroy</on_poweroff> >> <on_reboot>restart</on_reboot> >> <on_crash>restart</on_crash> >> <devices> >> <emulator>/usr/libexec/qemu-kvm</emulator> >> <disk type='block' device='disk'> >> <driver name='qemu' type='raw' cache='none' io='native'/> >> <source dev='/dev/fea-c01n01_vg0/vm01-sco5_0'/> >> <target dev='hda' bus='ide'/> >> <address type='drive' controller='0' bus='0' target='0' unit='0'/> >> </disk> >> <disk type='block' device='cdrom'> >> <driver name='qemu' type='raw'/> >> <target dev='hdc' bus='ide'/> >> <readonly/> >> <address type='drive' controller='0' bus='1' target='0' unit='0'/> >> </disk> >> <controller type='usb' index='0'> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' >> function='0x2'/> >> </controller> >> <controller type='ide' index='0'> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' >> function='0x1'/> >> </controller> >> <interface type='bridge'> >> <mac address='52:54:00:dc:39:71'/> >> <source bridge='vbr2'/> >> <model type='pcnet'/> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' >> function='0x0'/> >> </interface> >> <serial type='pty'> >> <target port='0'/> >> </serial> >> <console type='pty'> >> <target type='serial' port='0'/> >> </console> >> <input type='mouse' bus='ps2'/> >> <graphics type='vnc' port='-1' autoport='yes'/> >> <video> >> <model type='vga' vram='9216' heads='1'/> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' >> function='0x0'/> >> </video> >> <memballoon model='virtio'> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' >> function='0x0'/> >> </memballoon> >> </devices> >> </domain> >> >> Tue, 14 Oct 2014 16:30:00 DEBUG Domain installation does not appear >> to have been successful. >> If it was, you can restart your domain by running: >> virsh --connect qemu:///system start vm01-sco5 >> otherwise, please restart your installation. >> Domain installation does not appear to have been successful. >> If it was, you can restart your domain by running: >> virsh --connect qemu:///system start vm01-sco5 >> otherwise, please restart your installation. >> ==== >> >> Syslog: >> >> ==== >> Oct 14 16:29:58 fea-c01n01 kernel: device vnet0 entered promiscuous mode >> Oct 14 16:29:58 fea-c01n01 kernel: vbr2: port 2(vnet0) entering >> forwarding state >> Oct 14 16:29:59 fea-c01n01 kernel: qemu-kvm[11592]: segfault at 0 ip >> 00007f6ebd5d7648 sp 00007fff40f690b0 error 4 in >> qemu-kvm[7f6ebd485000+2c2000] >> Oct 14 16:29:59 fea-c01n01 abrt[11616]: Can't read /proc/11592/exe link >> Oct 14 16:29:59 fea-c01n01 kernel: vbr2: port 2(vnet0) entering disabled >> state >> Oct 14 16:29:59 fea-c01n01 kernel: device vnet0 left promiscuous mode >> Oct 14 16:29:59 fea-c01n01 kernel: vbr2: port 2(vnet0) entering disabled >> state >> ==== >> >> Versions: >> >> ==== >> # uname -r >> 2.6.32-431.29.2.el6.x86_64 >> >> gpxe-roms-qemu.noarch 0.9.7-6.10.el6 @base >> libvirt.x86_64 0.10.2-29.el6_5.12 @updates >> libvirt-client.x86_64 0.10.2-29.el6_5.12 @updates >> libvirt-python.x86_64 0.10.2-29.el6_5.12 @updates >> python-virtinst.noarch 0.600.0-18.el6 @base >> qemu-img.x86_64 2:0.12.1.2-2.415.el6_5.14 @updates >> qemu-kvm.x86_64 2:0.12.1.2-2.415.el6_5.14 @updates >> qemu-kvm-tools.x86_64 2:0.12.1.2-2.415.el6_5.14 @updates >> virt-viewer.x86_64 0.5.6-8.el6_5.3 @updates >> virt-what.x86_64 1.11-1.2.el6 @CentOS 6/6.5 >> ==== >> >> Thanks for any help or insights! >> > > _______________________________________________ virt-tools-list mailing list virt-tools-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/virt-tools-list
