Hi Klaus, My contribution to the translation of VDR. Regards, Yarema 2018-03-18 14:54 GMT+01:00 Klaus Schmidinger <Klaus.Schmidinger@xxxxxxx>: > VDR developer version 2.3.9 is now available at > > ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.9.tar.bz2 > > A 'diff' against the previous version is available at > > ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.8-2.3.9.diff > > MD5 checksums: > > 9e4202b046df9ea960d930ce99e967ab vdr-2.3.9.tar.bz2 > 38a0f436fbed219665725aa2e54a9ca0 vdr-2.3.8-2.3.9.diff > > Approaching version 2.4.0: > ========================== > > If there are no more serious bug reports, the final version 2.4.0 of VDR > shall be released on April 15. > So please test this developer version intensely and report any problems > you might encounter as soon as possible. > > The following language files still have the given number of untranslated > texts: > > PLUGINS/src/hello/po/ca_ES.po: 6 > PLUGINS/src/hello/po/da_DK.po: 6 > PLUGINS/src/hello/po/el_GR.po: 6 > PLUGINS/src/hello/po/es_ES.po: 6 > PLUGINS/src/hello/po/fr_FR.po: 6 > PLUGINS/src/hello/po/hu_HU.po: 6 > PLUGINS/src/hello/po/nl_NL.po: 6 > PLUGINS/src/hello/po/nn_NO.po: 6 > PLUGINS/src/hello/po/pt_PT.po: 6 > PLUGINS/src/hello/po/ro_RO.po: 6 > PLUGINS/src/hello/po/sl_SI.po: 6 > PLUGINS/src/hello/po/sv_SE.po: 6 > po/ar.po: 76 > po/ca_ES.po: 76 > po/cs_CZ.po: 22 > po/da_DK.po: 208 > po/el_GR.po: 271 > po/es_ES.po: 22 > po/et_EE.po: 7 > po/fi_FI.po: 3 > po/fr_FR.po: 22 > po/hr_HR.po: 208 > po/hu_HU.po: 22 > po/it_IT.po: 3 > po/lt_LT.po: 22 > po/mk_MK.po: 22 > po/nl_NL.po: 22 > po/nn_NO.po: 336 > po/pt_PT.po: 104 > po/ro_RO.po: 22 > po/ru_RU.po: 10 > po/sk_SK.po: 22 > po/sl_SI.po: 77 > po/sr_RS.po: 76 > po/sv_SE.po: 22 > po/tr_TR.po: 208 > po/uk_UA.po: 22 > po/zh_CN.po: 76 > > If nobody takes care of these, they will remain untranslated in version > 2.4.0. > > > > The changes since version 2.3.8: > > - Updated the Italian OSD texts (thanks to Diego Pierotto). > - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). > - Fixed a possible crash when stopping VDR (thanks to Matthias Senzel for > reporting and > helping to debug this one). > - Fixed handling VPS events outside the LingerLimit, which could cause > recordings to > stop prematurely (thanks to Johann Friedrichs). > - Fixed an invalid lock sequence when trying to remove a deleted recording > in case > of low disk space. > - Now making sure that AssertFreeDiskSpace() is called with the maximum > timer > priority in case there are several timers recording with different > priorities. > - The MTD mapper now avoids immediately reusing unique PIDs when switching > channels, > to prevent possible problems with old data in buffers (thanks to Onur > Sentürk). > - The function cDevice::GetVideoSystem() (which has been deprecated since > version 2.1.6) > has been finally removed. > - The macros used to control deprecated code or functions have been changed > to hold > numeric values (0 and 1), so that they can be controlled at compile time, > without > having to edit the actual source code (suggested by Jasmin Jessich). > - The default for DEPRECATED_VDR_CHARSET_OVERRIDE has been set to 0, which > means VDR > no longer reacts on the environment variable VDR_CHARSET_OVERRIDE. You can > add > 'DEPRECATED_VDR_CHARSET_OVERRIDE=1' when compiling in order to restore > this > functionality. However, it is recommended to use the command line option > --chartab > instead. > - The timeout for the channel display is now reset whenever the channel or > EPG data > changes. > - OSD menus now try to keep the offset of the list cursor at a constant > position on > the screen, even if the list is modified while being displayed. > - The LCARS skin's main menu now reacts to changes of the current channel's > name. > - If an event in the Schedules menu is marked with a 'T' or 'I' and the user > presses the > Red button to edit the timer, local timers are now preferred over remote > timers > in case there is more than one timer that will record that event. > - Switching the primary device is no longer done via osSwitchDvb (which has > been > removed), but rather by the main program loop reacting to changes in > Setup.PrimaryDVB. > - The new SVDRP commands 'LSTD' and 'PRIM' can be used to list all available > devices > and to switch the primary device (thanks to Thomas Reufer). > - Added some comments regarding font height (thanks to Thomas Reufer). > - Fixed handling timers during the change from DST to winter time (thanks to > Johann > Friedrichs). > - Added missing checks of 'player' in member functions of cControl, and > setting > cControl::player to NULL in cDvbPlayerControl::Stop() to avoid a possible > crash > with plugins that retrieve player information after a replay has been > stopped, but > before the replay control has been destroyed (thanks to Johann Friedrich). > - Now calling Hide() and cStatus::MsgReplaying(..., false) from > cReplayControl::Stop(), > to inform plugins about an ending replay session before the replay control > gets > destroyed. > - Fixed a possible crash when moving a recording between different volumes > (reported by > Matthias Senzel). > - Fixed positioning the cursor in the Recordings menu when moving a > recording between > different volumes. > - Added a note to PLUGINS.html about writing log messages in English. > - Fixed a deadlock when moving a folder containing several recordings > between > different volumes (reported by Matthias Senzel). > - Fixed positioning to the current item when changing the sort mode in the > Recordings > menu, in case there is a LastReplayed recording. > - The CAM menu is now automatically closed when the current channel is > switched > (suggested by Dietmar Spingler). > - Fixed a lengthy write lock on the Recordings list in case of moving a > folder with > more than one recording (thanks to Matthias Senzel). > - If TS packets are not accepted by the output device in Transfer Mode, this > is now > reported only once per minute in the log file. > - The new setup option "OSD/Sorting direction for recordings" can be used to > switch > the sequence in which recordings are presented in the "Recordings" menu > between > ascending (oldest first) and descendeng (newest first) (thanks to Matthias > Senzel). > - When moving recordings between volumes, the "Recordings" menu now displays > those items > that have not yet been moved completely as non-selectable. This avoids > situations > where trying to play such a recording might fail. > - Fixed canceling moving a folder with several recordings between volumes. > - When moving a recording to a different folder, the cursor is no longer > placed on the > new location of the recording, but rather stays in the original folder > (suggested by > Matthias Senzel). If the original folder got empty by moving away the last > recording > it contained, the cursor is moved up until a non empty folder is found. > - Changed the log message ""ERROR: copying directory '%s' to '%s' ended > prematurely" from > "error" to "info", because any actual error would have already been > reported before this > (suggested by Matthias Senzel). > - When selecting a folder for a recording or timer, it is now possible to > open a folder > even if it doesn't contain any subfolders (suggested by Matthias Senzel). > - Fixed a possible deadlock when detaching a receiver from a device. > - Moved any locking from cutter.c into recording.c, to avoid a problem with > locking > the Recordings list (reported by Matthias Senzel). > - Now using the 'example' macro in vdr.5 (thanks to Chris Mayo). > - Now unlocking the Recordings list before displaying an error message in > cMenuPathEdit::ApplyChanges() and cReplayControl::Stop() (reported by > Matthias Senzel). > - Fixed a possible deadlock when quickly zapping through encrypted channels > (reported > by Jörg Wendel). > - The new function cStatus::MarksModified() can be implemented by plugins to > get > informed about any modifications to the editing marks of the currently > played > recording (based on a patch from Jörg Wendel). > - Fixed handling editing marks in the replay progress display, in case the > marks are > deleted via the Info/Edit menu of the currently played recording (the > progress > display still displayed them). > - Limited some CAM related log messages to the actual master CAM, if any. > - The Perl script 'peerdemo' shows how one can find all the VDRs in the > local network > using the peer connection mechanism. > - Added the UPDATE-2.4.0 file. > - Making sure cSVDRPClient::Process() reads the entire reply once it started > reading, > even if no Response parameter is given. > - Replaced the warning regarding the open SVDRP port in the INSTALL file > with a remark > about using svdrphosts.conf to completely disable SVDRP access. > - Added a note about the fixed UDP port for SVDRP discovery to vdr.1. > - Fixed updating the Timers menu after turning a local timer on/off with the > Red > button. > - Fixed keeping the cursor position in the Recordings menu in case a timer > starts > recording while the menu is open. > - When a timer is newly created in the Timers menu, it now immediately > appears at the > correct position in the list, rather than first being added at the end and > then > jumping to the proper offset. > - Fixed getting the info of a newly edited recording (reported by Matthias > Senzel). > - Improved calculating signal strength and quality (thanks to Helmut > Binder). > - While a timer is recording, the file '.timer' in the recording directory > now contains > the full id of the timer that is currently recording into this directory. > This is used > to determine whether a timer is still recording on a remote VDR when > deleting a recording > from the Recordings menu. > - Fixed handling SVDRP peering for more than one instance of VDR on the same > machine, and > improved logging and debug output. > - Fixed case inconsistency with SVDRPDefaultHost in config.c. > - Added a section about the '.sort' file to vdr.5. > - Initiating the client side of a peer-to-peer SVDRP connection is now done > with the new > SVDRP command CONN instead of using the UDP port with the server's > address. > This change requires that all VDRs that shall take part in a peer-to-peer > network need > to be updated to this version. > - Moved handling remote timers into > cSVDRPClientHandler::ProcessConnections(). > - Combined Start/StopSVDRPServer/ClientHandler() into > Start/StopSVDRPHandler(). > - Updated the Polish OSD texts (thanks to Tomasz Maciej Nowak). > - When remote timers are fetched from a peer VDR, we no longer blindly > delete and re-add > them, but rather compare them and make only the minimum necessary changes. > - Fixed the CompareInts() function. > - Disabled the use of posix_fadvise() when reading (i.e. replaying), since > it caused > stuttering replay in fast forward and fast rewind mode in case the video > directory > is mounted via NFS. You can re-enable it by setting the macro > USE_FADVISE_READ to 1 > in tools.c. > - Modified cStateLock's SetExplicitModify() and IncState() (changed to > SetModified()) to > allow for the introduction of syncing a separate cStateKey to a > cStateLock. > - Assigning events to timers no longer triggers sending a POLL to all peer > VDRs. > - When making modifications to remote timers, the local VDR no longer sends > a POLL to > all remote VDRs. > - Fixed removing a cStateKey from a cStateLock (setting StateKey.stateLock = > NULL was > done too late, after the lock had already been released). > - Now writing the info file before attaching the recorder to the device, to > make sure it > is present when the recorder needs to update the fps value. > - Making sure the Schedules menu has a proper title, even if it is empty. > - Removed sending the SVDRP command UPDR to peer VDRs whenever a change is > made to the > recordings in the video directory (which was introduced in version 2.3.8), > because it > triggered re-reading the video directory too fast. > - Improved handling VPS timers to better react to EPG changes during an > ongoing recording. > - Commented out the logging in cMarks::Align(), to avoid log entries in case > of editing > marks that are not generated by VDR itself, and thus may be a little off > (suggested by > Jörg Wendel). You can activate this line again for debugging if necessary. > - Made the input buffer in cSVDRPClient dynamic. > - Fixed handling parameters in the S2SatelliteDeliverySystemDescriptor and > T2DeliverySystemDescriptor that were overwritten when parsing the > SatelliteDeliverySystemDescriptor or TerrestrialDeliverySystemDescriptor, > respectively. > - Modified cMenuTimers::Delete() to avoid a lengthy lock on the Timers list > while prompting > the user. > > Have fun! > > Klaus > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Attachment:
po_uk_UA.tar.gz
Description: application/gzip
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
