Hi Karim,
I have another idea - there are some other parameters:
vdr:~ # grep LIRC /install_etc/tbs/linux-tbs-drivers/v4l/.config
# CONFIG_LIRC_IGORPLUGUSB is not set
CONFIG_LIRC=m
# CONFIG_LIRC_IMON is not set
CONFIG_LIRC_SERIAL=m
CONFIG_IR_LIRC_CODEC=m
# CONFIG_LIRC_SASEM is not set
# CONFIG_LIRC_SERIAL_TRANSMITTER is not set
# CONFIG_LIRC_PARALLEL is not set
# CONFIG_LIRC_SIR is not set
# CONFIG_LIRC_ZILOG is not set
CONFIG_LIRC_STAGING=y
# CONFIG_LIRC_TTUSBIR is not set
# CONFIG_LIRC_BT829 is not set
vdr:~ # modinfo lirc_serial
...
parm: type:Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug, 5 = NSLU2
RX:CTS2/TX:GreenLED) (int)
...
I use a "home-brew" receiver, maybe you need some other "type" parameter.
Compare the v4l/.config from TBS with .config of your kernel.
On my system it looks like this:
vdr:~ # zgrep LIRC /proc/config.gz
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_ZILOG=m
Best regards.
Andreas Böttger
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
