Hi all,
I recently moved to Australia and now an looking to make my vdr work.
I have two quad LNBs (single local oscillator frequency) attached to a
Spaun 9x7 multi-switch.
The spaun is set to "Quad mode".
For the S156E position ("satellite A") I can tune to both H+V and run a
channel scan.
For the satellite "B" (S160E) I cannot tune anything - neither with vdr
nor with dvbscan.
On S156E I have a Foxtel (Sky-equivalent) box attached and it tunes
nicely, too. So maybe the Foxtel box did send some commands to the LNB
which made it work, whereas on S160E this did not happen (yet) ?
Can anybody please help with the correct diseqC.conf ?
My attempt (see below) to modify the one from
http://www.vdr-portal.de/index.php?page=Thread&postid=927921
did not work so far.
Thanks
Martin
# from this thread
# http://www.vdr-portal.de/index.php?page=Thread&postid=927921
# multiswitch + 2x Quad LNBs
##Multischalter Eingang A
#S13.0E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t
#S13.0E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T
#S13.0E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t
#S13.0E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 T
##Multischalter Eingang B
#S19.2E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
#S19.2E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T
#S19.2E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
#S19.2E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T
#
#Multischalter Eingang A
S156E 99999 V 10700 t v W15 [E0 10 38 F0] W15 A W15 t
#S156E 99999 V 10700 t v W15 [E0 10 38 F1] W15 A W15 T
S156E 99999 H 10700 t V W15 [E0 10 38 F2] W15 A W15 t
#S156E 99999 H 10700 t V W15 [E0 10 38 F3] W15 A W15 T
#Multischalter Eingang B
#S160E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
S160E 99999 V 10700 t v W15 [E0 10 38 F5] W15 B W15 T
#S160E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
S160E 99999 H 10700 t V W15 [E0 10 38 F7] W15 B W15 T
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
