Hi,
i don't think is file permission related.
ls -la /etc/vdr/iptvstream.sh
-rwxrwxrwx 1 media media 3348 Dec 24
12:23 /etc/vdr/iptvstream.sh
vdr is running with same user as script permission.
$ ps aux |grep iptv
662 media 0:43 /usr/bin/vdr -w 60 -Pepgtableid0 -Piptv
-Pstreamdev-server -Pvnsiserver -Pxineliboutput --local=none --primary
--remote=:37890
The problem is: the plugins execute cmd line without cote :/
VDR log:
ERROR: Script execution failed: /etc/vdr/iptvstream.sh 1 4321
Then, the shell (sh -c) does not take two parameters following..
Additional information from channels.conf:
L'Equipe
21;IPTV:10:S=1|P=0|F=EXT|U=/etc/vdr/iptvstream.sh|A=1:I:0:0:680=@4:0:0:4:0:0:0
url from script:
-------
...
case ${PARAMETER} in
1)
#EXTINF:0,21 - L'Equipe 21
URL="rtsp://mafreebox.freebox.fr/fbxtv_pub/stream?namespace=1&service=994&flavour=ld"
;;
...
-------
Thanks.
Le mardi 24 décembre 2013
Ian_and_joanna <ian_and_joanna@xxxxxxxxxxxx> a écrit:
> Hi,
>
> In Brief
>
> Have you checked file permissions?
>
> Detail
>
> The first example you quote that works is the way iptvstream.sh
> should be called I think (so that parameters can be passed to the
> script).
>
> The first thing I'd check are the file permissions on iptvstream.sh
> (i.e. the output from
>
> ls -l /etc/vdr/iptvstream.sh
>
> ) and that they allow the user running vdr to execute the script.
>
> In general I hesitate in modifying the source until I have ruled out
> other possibilities as I imagine an error of this nature in the
> source would have been picked up by others sooner (unless it is a
> very recent change).
>
> In closing
>
> First step check file permissions on the shell script.
>
> Regards,
>
> Ian.
>
> Sent from my mobile phone.
>
> -------- Original message --------
> From: Zouhair <infonux@xxxxxxxxx>
> Date: 2013/12/23 22:43 (GMT+00:00)
> To: VDR Mailing List <vdr@xxxxxxxxxxx>
> Subject: vdr-iptv "sh -c" iptvstream.sh issue
>
> Hi,
>
> the external script iptvstream.sh not execute from iptv plugins ?
> I get: "ERROR: Script execution failed: /etc/vdr/iptvstream.sh 1 4321"
>
> after looking at the source code "protocolext.c"
> ------
> // Create a new session for a process group
> ERROR_IF_RET(setsid() == -1, "setsid()", _exit(-1));
> if (execl(EXTSHELL, "sh", "-c", *cmd, (char *)NULL) == -1) {
> error("Script execution failed: %s", *cmd);
> _exit(-1);
> ...
>
> I tried to execute it in the same way:
>
> sh -c /etc/vdr/iptvstream.sh 1 4321
> not work. (the shell exit with no execution)
>
> I try with the cote (like):
> sh -c "/etc/vdr/iptvstream.sh 1 4321"
> or,
> sh /etc/vdr/iptvstream.sh 1 4321
> and, work fine.
>
> Should add cote or remove "-c" in source code to fix this ?
> Or any other solution ?
>
>
> Using: vdr-iptv-2.0.0 and VDR 2.0.2
>
> Thanks.
>
>
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
