Re: VDR jumps to old position after ff/rew

[Stefan Schallenberg <infos@xxxxxxxxx>]

Hi all,

Thanks for your ideas.

I am using an old (SD but not HD) FF PCI card and non-HD recordings. So 
neither of the situations you described applies as far as I understan.

Some more background:
A lot of my recordings are done with VDR 1.6, but the symptom occurs 
both with old and new recordings. I currently dont have a HD device 
attached. I am running in a XEN-virualized Environment with PCI passthrough.

vVdr:~ # lspci -v
00:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH 
Siemens/Technotrend/Hauppauge DVB card rev1.3 or rev1.5
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at f7fff000 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: av7110

00:01.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge 
DVB card rev2.1
        Flags: bus master, medium devsel, latency 64, IRQ 18
        Memory at f7ffe000 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: av7110


Stefan

Am 27.08.2013 20:36, schrieb Tony Houghton:
> This problem still exists with vdr-sxfe and HD recordings.
>
> On Tue, 27 Aug 2013 11:28:24 -0700
> VDR User <user.vdr@xxxxxxxxx> wrote:
>
> > I believe that's a problem with the video decoder. I had the same problem
> > using vdpau with vdr-xine long ago but it was quickly fixed. When I started
> > testing vdr-softhddevice, the problem re-appeared. You can enable "CONFIG
> > += -DH264_EOS_TRICKSPEED" in vdr-softhddevice/Makefile and it should work,
> > assuming you're using vdr-softhddevice & are using a recent git of it.
> >
> >
> > On Tue, Aug 27, 2013 at 9:51 AM, Stefan Schallenberg <infos@xxxxxxxxx>wrote:
> >
> > > Hi all,
> > >
> > > I detected a strange behaviour in VDR 2.0.2:
> > > When I replay a recording and press right for fast forwarding and after
> > > some time press "up" to continue playing at this position vdr jumps back to
> > > the position where I started the forwarding. I would expect it to continue
> > > replay at the position where I forwarded to.
> > >
> > > Is this a known bug or do I have to press other keys or is there a setting
> > > to change it?
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr