In article <51234507.6090302@xxxxxxx> you write: >On 19.02.2013 01:48, Juergen Lock wrote: >> On Mon, Feb 18, 2013 at 11:52:31PM +0100, Klaus Schmidinger wrote: >>> On 18.02.2013 23:43, Juergen Lock wrote: >>>> In article <5121FBA4.2050108@xxxxxxx> you write: >>>>> On 16.02.2013 16:46, Juergen Lock wrote: >>>>>> Hi! >>>>>> >>>>>> Now that I have a spare DVB-S2 tuner (TechniSat SkyStar USB HD >>>>>> (adapter2); the others on this box are atm Hauppauge Nova-TD model >>>>>> 1172 (adapter 0+1) and TechnoTrend S2-3600 (adapter3) - all USB) I >>>>>> decided to play with vdr device bonding. I discovered three things: >>>>>> (still using vdr 1.7.29, I know I should upgrade... :) >>>>>> >>>>>> 1. The LNB setup OSD menu causes bonding to fail (it's trying to >>>>>> bond a DVB-T tuner) if I set the two DVB-S2 tuners as "connected >>>>>> to sat cable 1"; it works with "sat cable 2". Maybe it somehow >>>>>> thinks of (one of?) the DVB-T tuner(s) as cable 1 too? >>>>> >>>>> What does the "Setup/LNB" menu look like on your system? >>>>> Does it list only the two DVB-S devices, or all four of them? >>>>> Which device numbers does it display? >>>>> >>>>> What does the "DeviceBondings = ..." line in setup.conf look like >>>>> in both cases (working/not working)? >>>>> >>>> working: >>>> >>>> Einstellungen - LNB >>>> >>>> DiSEqC benutzen: nein >>>> SLOF (MHz): 11700 >>>> Untere LNB-Frequenz (MHz): 9750 >>>> Obere LNB-Frequenz (MHz): 10600 >>>> Device 3 angeschlossen an Sat-Kabel: 2 >>>> Device 4 angeschlossen an Sat-Kabel: 2 >>>> >>>> -> >>>> DeviceBondings = 1 0 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >>>> >>>> broken: >>>> >>>> Einstellungen - LNB >>>> >>>> DiSEqC benutzen: nein >>>> SLOF (MHz): 11700 >>>> Untere LNB-Frequenz (MHz): 9750 >>>> Obere LNB-Frequenz (MHz): 10600 >>>> Device 3 angeschlossen an Sat-Kabel: 1 >>>> Device 4 angeschlossen an Sat-Kabel: 1 >>>> >>>> -> >>>> DeviceBondings = 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >>>> >>>>> You wrote that your DVB-S2 device is "adapter2". Does this mean it >>>>> is actually "adaper2/frontend0" and "adapter2/frontend1"? >>>>> >>>> No the other DVB-S2 tuner is adapter3 (TechnoTrend S2-3600), all four >>>> only have frontend0 no frontend1. >>>> >>>>> Have you appliead any patches to VDR? >>>> >>>> Currently the two patches belonging to the iptv and ttxtsubs plugins >>>> and my stb0899 signal strength patch, and of course the FreeBSD >>>> portability patches. >>>> >>>>> If so, what happens without them? >>>> >>>> I will have to check that later tho I guess they are unrelated... >>>> >>>>> Same for plugins. >>>>> >>>> I just started vdr with just the xineliboutput plugin (I don't have >>>> an ff card) and got the same >>>> >>>> DeviceBondings = 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >>>> >>>> when setting both DVB-S2 tuners as ".. connected to sat cable 1". >>>> >>>> I wonder, could this be a result of me running vdr with only the DVB-S2 >>>> tuners once and the first 1 in DeviceBondings that I may have set then >>>> simply doesn't get reset when the first two tuners became DVB-T? >>> >>> I'll have to further look into this, but you might be on to something here. >>> Please stop VDR, set that line to >>> >>> DeviceBondings = 0 0 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >>> >>> manually and restart VDR. Does it work then? >>> >> Yeah, looks like. (I should have tested that earlier... :) > >Just one more thing: did you get any log messages regarding device bonding >when it didn't work? > Sure, I just reproduced it: ERROR: can't bond device 3 with device 1 (only DVB-S(2) devices can be bonded) >> Btw did you take a look at the bondMutex vs mutex locking yet? I've had >> no further deadlocks with the second patch now. > >I was a little cnfused about this at first ;-) >Will look into it later. > >BTW: you sent your original posting "To" me and "Cc"d the VDR-ML. Therefore my reply >inadvertently only went to you and not to the list. I'm no replying explicitly to the >list. Please send postings only to the list and do not Cc me (unless you only want to >contact me privately). > Oh, sorry, will try to remember. Thanx, Juergen _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
