I haven't tried the patch, just the plugin. The plugin had some nice
features that where handy. My rotor isn't even active now. Needs to be
realigned after replacing a limit switch and I never have much secess
aligning it. That and there is so little FTA in the US on small dish.
Hardly worth the effort.
On 2/12/2013 11:29 PM, Teemu Suikki wrote:
Hi,
thanks alot! This works very well!
Also I think my "section handler delay" patch is not necessary with this
gotoxx patch.. At least my delay message appears much later now, so the
delay is already in the gotox handling.
This GotoX patch is so cleanly integrated to VDR, I think it should be
included in the official release? I think all current diseqc motors have
gotox functionality, so plugins like rotor(ng) are really unnecessary if
gotox works.
--
Teemu
2013/2/12 Ales Jurik <ajurik@xxxxxxxx <mailto:ajurik@xxxxxxxx>>
On 02/12/2013 12:17 PM, Teemu Suikki wrote:
Hi!
I was trying to find source code for the rotor plugin (not
rotorng)..
all the links seem to be outdated. Anyone have any version?
I'm really only interested in seeing how the GotoX stuff works. I'm
trying to send gotox command from diseqc.conf, but the dish
doesn't move
at all.
I have the Eutelsat diseqc 1.2 specification, but the GotoX stuff is
marked preliminary and they talk only about terrestrial
antennas.. Must
be some difference.
Here's my non-functioning diseqc.conf entry:
#S1.0W - Elevation 17.44, Azimuth 209.62, Motor angle -28.45
S1.0W 11700 V 9750 t W15 [E0 31 6E 0D 07] W15 v t
S1.0W 99999 V 10600 t W15 [E0 31 6E 0D 07] W15 v T
S1.0W 11700 H 9750 t W15 [E0 31 6E 0D 07] W15 V t
S1.0W 99999 H 10600 t W15 [E0 31 6E 0D 07] W15 V T
I actually made a C program that generates these lines for all
visible
satellites. This might be of interest to people who are waiting for
gotox support, if I ever get this working..
_________________________________________________
vdr mailing list
vdr@xxxxxxxxxxx <mailto:vdr@xxxxxxxxxxx>
http://www.linuxtv.org/cgi-__bin/mailman/listinfo/vdr
<http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>
Hi Teemu,
I'm using the patch based on patch from Seppo Ingalsuo (see
http://patchwork.linuxtv.org/__patch/12911/
<http://patchwork.linuxtv.org/patch/12911/>) - this version I'm used
now with vdr-1.7.27 together with yaVDR, but have info that it works
also with later versions. Patch integrate gotoxx into VDR and works
without problems.
Regards,
Ales
_________________________________________________
vdr mailing list
vdr@xxxxxxxxxxx <mailto:vdr@xxxxxxxxxxx>
http://www.linuxtv.org/cgi-__bin/mailman/listinfo/vdr
<http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>
--
Teemu Suikki
http://www.z-power.fi/
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
