Card is working fine, but i cannot see signal level on femon, and can not use any channel scan program like wirbelsacn ( no signal il locked ).
I hoped the problem would be resolved in the latest kernel drivers, but not, at least in yaVDR64 0.4.0 (based on Ubuntu 11.04 Natty Narwhal), with linux-media-dkms.
2012/5/20 Thomas Sailer <sailer@xxxxxxxxxxxxxxxxxxxx>
On 05/20/2012 05:51 PM, VDR User wrote:Apart from the SNR/Signal Strength issue, does the card work for you? I just threw it out again and replaced it with a venerable stv0299 card, because it never reliably locked (it locked maybe every fourth time). This is with good signals, neither the stv0299 nor the stv090x cards have any problems with the signal. My stb0899 card is a technisat skystar hd2.
This subject has come up at least a few times, one of which was in the
"The right way to interpret the content of SNR, signal strength and
BER from HVR 4000 Lite" thread. For some reason the
Tom
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
