On Sun, 11 Mar 2012 23:41:06 +0000 Tony Houghton <h@xxxxxxxxxxx> wrote: > I can't get Channel 4 HD on Freesat with VDR 1.7.23-1. It just stays > silent with the picture frozen on the previous channel, or "No > signal". Any ideas? The plot thickens. I've done some more tests. I used hdvb to record samples of BBC 1 HD, ITV1 HD and Channel 4 HD. MPlayer can play all of them. It tells me BBC is 1440x1088, the others are 1920x1088. All appear to be interlaced. BBC appears fine on my HTPC/TV, with sxfe configured for vdpau with bob deinterlacing. On a remote PC running sxfe (onboard Intel graphics, so no vdpau) I could see interlacing artifacts, probably because I configured deinterlacing off in VDR's OSD (see below). ITV plays too slowly in sxfe on the HTPC. The graphics card is only an 8200 so I tried reconfiguring .xine/config_xineliboutput to use xv and turned off deinterlacing (see above). It didn't seem to make any difference, but the CPU is a 2.4GHz Athlon x2, so it should be fast enough. It was with MPlayer, and so was the other PC (a somewhat faster Core i5 2500k) with vdr-sxfe. Channel 4 won't play at all in sxfe on either PC, but does in MPlayer. _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
