Hello, I have added a second dvb-s2 card to my vdr 1.7.21 box (for a total of 2 dvb-s2 cards, and nothing else) The first card (adapter0) is connected to a motor and diseqc.conf reflects this: S19.2E 11700 V 9750 t v W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 t S19.2E 99999 V 10600 t v W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 T S19.2E 11700 H 9750 t V W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 t S19.2E 99999 H 10600 t V W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 T S13.0E 11700 V 9750 t v W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 t S13.0E 99999 V 10600 t v W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 T S13.0E 11700 H 9750 t V W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 t S13.0E 99999 H 10600 t V W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 T S5.0E 11700 V 9750 t v W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 t S5.0E 99999 V 10600 t v W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 T S5.0E 11700 H 9750 t V W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 t S5.0E 99999 H 10600 t V W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 T Now the second card is connected to a diseqc 1.0 switch with 2 feeds (S5.0E and S0.8W) How can I modify diseqc.cond so that vdr is aware that only the second card can get 0.8W and S5.0E can be accessed by both cards? _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
