The problem is solved with the manual update of VPID to PPID value. Thank again Dominique ! Regards. Le 25/11/2011 12:53, Marc a écrit : > Hi, > > I use vdr (1.7.21) with xvdr (git version). I can't record 2 channels, > vdr start the recording but the file is empty and after 30 seconds, vdr > throws an emergency exit : > Nov 25 12:18:34 myhost vdr: [12866] recording thread started (pid=10925, > tid=12866) > Nov 25 12:18:34 myhost vdr: [10949] XVDR: Recordings state changed (6) > Nov 25 12:18:34 myhost vdr: [10949] XVDR: Requesting clients to reload > recordings list > Nov 25 12:19:05 myhost vdr: [12866] ERROR: video data stream broken > Nov 25 12:19:05 myhost vdr: [12866] emergency exit request ignored > according to setup > > When I try to watch these streams with xineliboutput, the stream starts > only after 30 seconds and I have only the sound : > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> DISCARD 114940568 61162 > [19022] [demux_vdr] input->read_block() was interrupted > [19021] [input_vdr] <control> STILL 0 > [19022] [input_vdr] <control> <data> DISCARD 114940568 61162 > [19022] [input_vdr] wait_stream_sync: discard_index 114940568 != curpos > 114869128 ! (diff 71440) > [19022] [input_vdr] wait_stream_sync: streams synced at 114940568/114940568 > [19021] [input_vdr] <control> LIVE 0 > [19022] [input_vdr] <control> <data> BLANK > prebuffer=14400 pts > [19021] [input_vdr] <control> STILL 0 > vdpau_set_property: property=0, value=0 > vo_vdpau: deinterlace: none > [19022] [input_vdr] wait_fifos_empty: video 0, audio 0 > prebuffer=2000 pts > prebuffer=14400 pts > [19021] [input_vdr] <control> STILL 0 > [19021] [input_vdr] <control> LIVE 1 > prebuffer=14400 pts > [19021] [input_vdr] <control> TRICKSPEED 1 > [19021] [input_vdr] <control> STILL 0 > [19022] [demux_vdr] PAT: program changed, flushing demuxer > [19022] [demux_vdr] PMT changed, resetting demuxer > [19022] [demux_vdr] New PTS: 7327138046 (AUDIO) > [19022] [demux_vdr] audio stream changed: 00000000 -> 03010000 > *** The stream doesn't start > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> OSDCMD > *** After 30 seconds, the audio start but no picture > > An example with an other channel of the same provider (France Television > Group, the 2 wrecked channels are from the same provider): > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> DISCARD 56596648 30119 > [19022] [demux_vdr] input->read_block() was interrupted > [19021] [input_vdr] <control> STILL 0 > [19021] [input_vdr] <control> LIVE 0 > prebuffer=14400 pts > [19021] [input_vdr] <control> STILL 0 > vdpau_set_property: property=0, value=0 > vo_vdpau: deinterlace: none > [19022] [input_vdr] <control> <data> DISCARD 56596648 30119 > [19022] [input_vdr] wait_stream_sync: streams synced at 56596648/56596648 > [19022] [input_vdr] <control> <data> BLANK > [19022] [input_vdr] wait_fifos_empty: video 0, audio 0 > prebuffer=2000 pts > prebuffer=14400 pts > [19021] [input_vdr] <control> STILL 0 > [19021] [input_vdr] <control> LIVE 1 > prebuffer=14400 pts > [19021] [input_vdr] <control> TRICKSPEED 1 > [19021] [input_vdr] <control> STILL 0 > [19022] [demux_vdr] PAT: program changed, flushing demuxer > [19022] [demux_vdr] PMT changed, resetting demuxer > [19022] [demux_vdr] New PTS: 6415996599 (VIDEO) > [19022] [demux_vdr] audio stream changed: 00000000 -> 03410000 > [19021] [input_vdr] <control> HDMODE 1 > [19021] [input_vdr] WARNING: xine-engine setting > "engine.buffers.video_num_frames":22 is too small for some HD channels > vdpau_set_property: property=0, value=1 > vo_vdpau: deinterlace: temporal_spatial > Broken NAL, skip it. > ffmpeg_audio_dec: increasing buffer to 98304 to avoid overflow. > Allocate 4 reference frames > Create decoder: vdp_device: 1, profile: 8, res: 1920x1080 > vo_vdpau: deinterlace: temporal > vo_vdpau: set_scaling_level=0 > vo_vdpau: enabled features: inverse_telecine=1 > vo_vdpau: disable noise reduction. > vo_vdpau: disable sharpness. > vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, > contrast=1.000000, brightness=0.000000, color_standard=1 studio_levels=0 > vo_vdpau: skip_chroma = 0 > vo_vdpau: background_color = 0 > [19021] [input_vdr] <control> OSDCMD > [19021] [input_vdr] <control> OSDCMD > > Regards, > > Marc. > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
