On 05.12.2011 20:42, Detlef Heine wrote:
- The new setup options "LNB/Device n connected to sat cable" can be
used to define
which DVB-S devices are connected to the same sat cable and are
therefore "bonded".
This obsoletes the LNBSHARE patch. Users of the LNBSHARE patch will need
to newly
set up their sat devices with the above options.
Hello Klaus,
I have much trouble with the new added Feature from above.
My vdr have a S2-6400 card and 1 cable with an splitter for the 2 frondends.
I have set up the options correctly. But, specifically on Pro7, the picture and sound freeze after some seconds. The vdr-log show in this moment lines like this:
Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1435 from 511+511=2:512=deu@3;515=deu@106:0:32 to 511+511=2:512=deu@3,513=eng@3;515=deu@106:0:32
Dec 5 19:24:31 hd-vdr vdr: [1628] changing pids of channel 1440 from 2815+2815=2:2816=deu@3;2819=deu@106:0:32 to 2815+2815=2:2816=deu@3,2817=eng@3;2819=deu@106:0:32
Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1512 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32
Dec 5 19:24:51 hd-vdr vdr: [1628] changing pids of channel 1513 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32
Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1514 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106:0:32
Dec 5 19:24:52 hd-vdr vdr: [1628] changing pids of channel 1511 from 511+511=27:0;515=deu@106,516=eng@106:0:32 to 511+511=27:0;515=deu@106,516=eng@106:0:32
Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1444 from 767+767=27:0;771=deu@106,772=eng@106:0:32 to 767+767=27:0;771=deu@106,772=eng@106:0:32
Dec 5 19:25:12 hd-vdr vdr: [1628] changing pids of channel 1442 from 1023+1023=27:0;1027=deu@106:0:32 to 1023+1023=27:0;1027=deu@106:0:32
Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1441 from 1279+1279=27:0;1283=deu@106:0:32 to 1279+1279=27:0;1283=deu@106,1284=eng@106:0:32
Dec 5 19:25:13 hd-vdr vdr: [1628] changing pids of channel 1443 from 1535+1535=27:0;1539=deu@106:0:32 to 1535+1535=27:0;1539=deu@106:0:32
I don't see anything wrong with these messages.
With the LNBSHARE patch and vdr-1.7.21 I had no problems like this.
How can I fix this?
I'll test this next weekend and will see what I can do.
Klaus
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
