Am 02.09.2011 16:08, schrieb Klaus Schmidinger:
On 30.08.2011 19:40, Dirk Vornheder wrote:
Am 29.08.2011 22:49, schrieb Klaus Schmidinger:
On 29.08.2011 22:30, Dirk Vornheder wrote:
On 19.08.2011 18:43, Klaus Schmidinger wrote:
There have been some reports about recording problems with VDR
1.7.20
on some HD channels.
This patch should fix this.
Klaus
--- remux.c 2011/08/15 09:50:14 2.58
+++ remux.c 2011/08/19 15:33:26
@@ -974,8 +974,10 @@
payloadUnitOfFrame = (payloadUnitOfFrame + 1) %
-framesPerPayloadUnit;
if (payloadUnitOfFrame != 0 && independentFrame)
payloadUnitOfFrame = 0;
- if (payloadUnitOfFrame)
+ if (payloadUnitOfFrame) {
+ newPayload = false;
newFrame = false;
+ }
}
if (framesPerPayloadUnit <= 1)
scanning = false;
Would the log messages look like this without above patch?
Aug 21 16:15:12 vdr vdr: [3138] frame type not in first packet of
payload - buffering
Aug 21 16:15:12 vdr vdr: [3138] ERROR: too many bytes for frame type
buffer (23312 > 940) - dropped 23124 bytes
...
Those were the reports I got from users.
Klaus
Patch for remux.c doesn't fix the problem if i use my Hauppauge
PVR-cards 500 !
With DVB-T-/DVB-C-/DVB-S-cards/-channels everything works fine.
Aug 29 22:07:44 pcneu vdr: [20700] record
/video0/ZIB_2/2011-08-29.21.57.13-0.rec
Aug 29 22:07:44 pcneu vdr: [20700] creating directory /video0/ZIB_2
Aug 29 22:07:44 pcneu vdr: [20700] creating directory
/video0/ZIB_2/2011-08-29.21.57.13-0.rec
Aug 29 22:07:44 pcneu vdr: [20700] recording to
'/video0/ZIB_2/2011-08-29.21.57.13-0.rec/00001.ts'
Aug 29 22:07:44 pcneu vdr: [20700] creating directory /video4/ZIB_2
Aug 29 22:07:44 pcneu vdr: [20700] creating directory
/video4/ZIB_2/2011-08-29.21.57.13-0.rec
Aug 29 22:07:44 pcneu vdr: [21580] recording thread started
(pid=20700, tid=21580)
Aug 29 22:07:44 pcneu vdr: [20700] closing SVDRP connection
Aug 29 22:07:44 pcneu vdr: [21581] receiver on device 10 thread
started (pid=20700, tid=21581)
Aug 29 22:07:44 pcneu vdr: [20700] connect from 127.0.0.1, port 49816
- accepted
Aug 29 22:07:45 pcneu vdr: [20700] closing SVDRP connection
Aug 29 22:07:45 pcneu vdr: [21582] PvrReadThread of /dev/video2 thread
started (pid=20700, tid=21582)
Aug 29 22:07:45 pcneu vdr: [21580] frame type not in first packet of
payload - buffering
Aug 29 22:07:45 pcneu vdr: [21580] ERROR: too many bytes for frame
type buffer (2444 > 940) - dropped 2444 bytes
...
Can you please provide a 1 minute VDR recording from that device (made
with the most recent
developer version that works for you) and tell me where to download it?
Klaus
The upload to Sigi's FTP-Server has finished.
The filename is problemvdr1720pvr3sat00001.ts !
Apparently in this file every TS packet that starts a new PES packet
has the "Payload Unit Start Indicator" flag set. Normally (AFAIK) this
should only be set for TS packets that contain the beginning of an
actual payload unit (which may consist of several PES packets).
So I would assume that the TS data is in error.
I would say this is the expected behaviour as one PES packet normally is
one payload unit. The MPEG2 standard only defines that when the PUSI bit
is set a PES packet shall start in the payload of the TS packet. There
is no other limitation.
Andreas
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
