Hi!
Would there be a patch for 1.6.0?
Regards
Marco
Am 22.05.2011 12:45, schrieb Klaus Schmidinger:
On 05/22/11 00:35, Klaus Schmidinger wrote:
On 21.05.2011 23:51, Marco Göbenich wrote:
Hi!
No, checked against vanilla vdr-1.6-0, diseq.c and diseq.h are not modified.
I looked again in the logs and it seems that this happens when a epg scan is triggered, all entries seem to occur on times when there are free devices.
Sounds like two threads are accessing a cDiseqc object at the same time.
For a quick test, can you please try adding the following two lines:
char *cDiseqc::Codes(char *s)
{
static cMutex Mutex; //ADD
cMutexLock MutexLock(&Mutex); //ADD
char *e = strchr(s, ']');
Looks like cDiseqc::Execute(), if called at the same time from
two different threads, modified the member variable 'numCodes'
in both calls and thus one of them ended up getting too high.
I have attached a patch that should fix this. It also makes
the whole thing more 'const'.
Please let me know if this works in your environment.
Klaus
Am 21.05.2011 16:26, schrieb Klaus Schmidinger:
On 04/25/11 23:37, Marco Göbenich wrote:
Hi!
Forgot to say that I'm using vdr-1.6 with TechniSat Gigaswitch 9/20.
Regards
Marco
Am 25.04.2011 23:25, schrieb Marco Göbenich:
Hi!
I get the following errors:
Apr 25 22:22:56 vdr10 vdr: [7893] ERROR: too many codes in code sequence '[E0 10 38 F0] W15 A W15 t'
Apr 25 22:25:44 vdr10 vdr: [7890] ERROR: too many codes in code sequence '[E0 10 38 F6] W15 B W15 t'
Apr 25 22:25:44 vdr10 vdr: [7893] ERROR: too many codes in code sequence '[E0 10 38 F6] W15 B W15 t'
Apr 25 22:40:36 vdr10 vdr: [7896] ERROR: too many codes in code sequence '[E0 10 38 F5] W15 B W15 T'
Apr 25 22:46:45 vdr10 vdr: [7890] ERROR: too many codes in code sequence '[E0 10 38 F6] W15 B W15 t'
Apr 25 22:52:21 vdr10 vdr: [7893] ERROR: too many codes in code sequence '[E0 10 38 F3] W15 A W15 T'
Apr 25 23:19:42 vdr10 vdr: [7893] ERROR: too many codes in code sequence '[E0 10 38 F7] W15 B W15 T'
No Problems with recordings so far, but my diseqc.conf is from the wiki
and I don't know how to solve this..
my diseqc.conf:
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 T
S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t
S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T
S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t
S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T
I can't see why this error would occur, your diseqc.conf looks fine.
Is your diseqc.h or diseqc.c source file patched in any way?
KlAUS
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
--
Needful GbR Rheinstraße 60a Telefon +49 (0) 26 24 / 95 29 301
56203 Höhr-Grenzhausen Telefax +49 (0) 26 24 / 95 29 303
http://www.needful.de E-Mail mg@xxxxxxxxxx
|
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
