Hi, perhaps the pid's have changed. Pls do a rescan (with wscan or so) and compare the newly generated channels.conf with your entry. 2010/10/22 Dirk E. Wagner <m740@xxxxxxxxxxxxxxxxxxx>: > Hi, > > On 18.10.2010 12:00, vdr-request@xxxxxxxxxxx wrote: >> >> I have a strange problem with a relatively new DVB-T/SD/MPEG2 channel in >> Sweden. If I try to record from it all I get is a zero-byte file and VDR >> restarts after the standard 30 seconds reporting the infamous "ERROR: >> video >> data stream broken". All other channels on that mux are perfectly OK in >> VDR. > > I can confirm this problem with vdr 1.6 and 1.7 with DVB-T channel Super-RTL > in Rhein-Main-Area in Germany. I posted this in the german vdr forum, but > without response: > > http://vdr-portal.de/board/thread.php?threadid=99985 > > The Super-RTL channel worked for a long time without problems. Since several > weeks the problem arise, so I think the dvb stream was changed. > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
