Am 14.10.10 12:01, schrieb Arturo Martinez:
Could somebody tell me how could I implement this within vdr, so I
select 'Commands' and then the file to be converted and either it calls
the bash script to do the job or otherwise converts it using the same
parameters?
check the file MANUAL in the vdr directory:
* Processing Recordings
The configuration file 'reccmds.conf' can be used to define system
commands
that can be applied to the recording that is currently highlighted in the
"Recordings" menu. The "Red" key in the "Recordings" menu opens the
"Recording
commands" menu if there are commands defined in the file
'reccmds.conf'. Pressing
one of the keys '1'..'9' in the "Recordings" menu executes the
corresponding
command from 'reccmds.conf' (see also "Executing system commands" below).
You can select a recording, press the red key and select the command you
want to execute on the recording.
So you can export it to several formats and more.
Matthias
--
"Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the universe trying to
produce bigger and better idiots. So far, the universe is winning." --
Rich Cook
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
