Can anyone help me on my problem?
I've found I can get a picture with "mplayer /dev/dvb/adapter0/dvr0" when I
szap, BUT only if I add the "-r" switch
szap -r -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV"
1) If I miss out the "-r" switch I can't get a picture from dvr0.
2) If I add the "-r" switch, mplayer detects the TS format and plays the
live TV perfectly.
3) If I miss out the "-l 11300" I can't get the front end to lock
I still can't get the front end to lock in VDR either - so no recording and
no live TV.
I've tried all sorts of LNB config in setup.conf - latest being:
Use DiSEqC: no
SLOF (MHz): 11700
Low LNB frequency (MHz): 9750
High LNB frequency (MHz): 10600
But I can't get it to work.
Any ideas?
But I'm still getting:
Oct 8 07:34:21 callin vdr: [1677] saved setup to
/etc/vdr/vdr-1.7.15/setup.conf
Oct 8 07:34:27 callin vdr: [1677] switching to channel 1
Oct 8 07:34:30 callin vdr: [1681] frontend 0/0 timed out while tuning to
channel 1, tp 112483
Oct 8 07:35:35 callin vdr: [1681] frontend 0/0 timed out while tuning to
channel 1, tp 112483
And I can still szap:
./szap -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV"
reading channels from file '/etc/vdr/vdr-1.7.15/channels.conf'
zapping to 1 'Maori TV':
sat 0, frequency = 12483 MHz H, symbolrate 22500000, vpid = 0x0202, apid =
0x028c sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 03 | signal c94f | snr 95c4 | ber 0000ff17 | unc fffffffe |
status 1f | signal ca5e | snr 9537 | ber 00000600 | unc fffffffe |
FE_HAS_LOCK
status 1f | signal ca76 | snr 95d6 | ber 00000700 | unc fffffffe |
FE_HAS_LOCK
status 1f | signal c940 | snr 95a9 | ber 00000600 | unc fffffffe |
FE_HAS_LOCK
status 1f | signal ca7e | snr 9558 | ber 00000600 | unc fffffffe |
FE_HAS_LOCK
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
