Hi
My dvb-s LNB is a Ku-Band LNBG DKF-2024.
The box says:
Input 11.70-12.50 Ghz
L.O. 10.75 Ghz
Noise 0.6dB
Gain 60dB
If I set VDR up as follows:
Use DiSEqC: no
SLOF (MHz): 10750
Low LNB frequency (MHz): 11700
High LNB frequency (MHz): 12500
When I change channels I get:
Sep 25 21:15:18 localhost vdr: [2058] ERROR: frontend 0/0: Invalid argument
Sep 25 21:15:18 localhost kernel: DVB: adapter 0 frontend 0 frequency
12456000 out of range (950000..2150000)
If I set it to
Use DiSEqC: no
SLOF (MHz): 11300
Low LNB frequency (MHz): 11300
High LNB frequency (MHz): 11300
I don't get this error, but get:
Sep 25 21:15:57 localhost vdr: [2058] frontend 0/0 timed out while tuning to
channel 3, tp 112456
Sep 25 21:17:02 localhost vdr: [2058] frontend 0/0 timed out while tuning to
channel 3, tp 112456
Sep 25 21:18:07 localhost vdr: [2058] frontend 0/0 timed out while tuning to
channel 3, tp 112456
I'm using a dm1105 dvb-s card which works under Windows on the same box, but
szap and VDR do not. I can scan channels though with:
./scan dvb-s/OptusB1-NZ -l 11300 -x 0
OptusB1-NZ being:
S 12456000 H 22500000 AUTO
S 12483000 H 22500000 AUTO
Any suggestions?
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr