hello guys i to would like to know when you start work on the hd homerun as i have one and not found anything working in vdr yet but ive just begun the searching for info on how2 set it up... i wont be able to put a lot of extra time but am looking... let the mail list know what you do... abbenormal ps it is a nice tuner have it working another way not vdr On 12/15/09, Calypso Cricket <calypsocricket@xxxxxxxxx> wrote: > I have not thought about how to do it as yet. I was hoping to ask here > as I am sure someone has a homerun going with VDR. > > BTW - I got one US ATSC channel to tune with help from Alex. He modified > one of my w_scan channel output and it worked perfectly. > > From: > WESH-DT:201028615:8VSB:49:52:3 > > To: > WESH-DT:201028615:B6M10:T:0:49:0;52:0:0:3:0:565:0 > > > Timothy D. Lenz wrote: >> Are you going to be using the IP plugin to connect to the homerun? was >> thinking about that unit before I got the card and the only way I saw >> to use it was with the ip plugin >> >> Calypso Cricket wrote: >>> Yes, unfortunately I have 2 ATSC PCI cards and will be adding a >>> HDHomeRun dual tuner, so I will have 4 ATSC tuners. If if does not work >>> with more than one, then this will be a problem. >>> >>> Timothy D. Lenz wrote: >>>> I don't have a problem with getting the channels as long as I use the >>>> built in scanner for the plugin, then move the data over to the >>>> channels.conf. What I have a problem with is I have a dual tuner and >>>> vdr keeps loosing control of one of the tuners. If it happens to be on >>>> the secondary when it looses, then it's the first tuner that goes.I >>>> don't need to restart drivers, only vdr/xine to restore it. I have >>>> also noticed that disabling the atsc epg plugin seems to stop the >>>> problem but the author only has one tuner, so no way to confirm/check >>>> the problem. If I ever get time to upgrade my other vdr box, it will >>>> have both the same dual tuner and a single atsc tuner and a sat tuner. >>>> I'll then be able to see if the tuner loss is just that card. >>>> >>>> Be sure to use the latest atsc plugin >>>> >>>> VDR User wrote: >>>>> On Sun, Dec 13, 2009 at 12:11 PM, Calypso Cricket >>>>> <calypsocricket@xxxxxxxxx> wrote: >>>>>> Hello, >>>>>> I have been banging my head on trying to get my two ATSC cards to >>>>>> show >>>>>> content in VDR. I have applied the patch >>>>>> (http://www.fepg.org/patches/vdr-1.7.2-atsc-0.0.3.diff) and also the >>>>>> plugin found here: http://www.fepg.org/atscepgReadMe.html >>>>>> >>>>>> However, the plugin does not lock onto any channels. I am able to use >>>>>> 'scan' and 'w_scan'. However, these scan tools does not seem to >>>>>> produce >>>>>> the correct channels.conf file format. >>>>>> >>>>>> If anyone has made US OTA ATSC work, please provide some guidance. >>>>>> Thank >>>>>> you. >>>>> I know a few people who have been struggling with VDR+ATSC for quite a >>>>> while. I've wanted to give it a go myself but not if it's a constant >>>>> fight/hassle to have it running. Hopefully ATSC support will become a >>>>> part of vanilla VDR at some point but I honestly don't think that's >>>>> very high on the priority list. Doesn't hurt to ask however! >>>>> >>>>> _______________________________________________ >>>>> vdr mailing list >>>>> vdr@xxxxxxxxxxx >>>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >>>>> >>>> _______________________________________________ >>>> vdr mailing list >>>> vdr@xxxxxxxxxxx >>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >>>> >>> >>> >>> _______________________________________________ >>> vdr mailing list >>> vdr@xxxxxxxxxxx >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >>> >> > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
