There is the isue whereone tunner might be connected to an LNB on a rotor and another to a fixed. Knowing how the tunner can tune wouldn't help then. ----- Original Message ----- From: "Klaus Schmidinger" <Klaus.Schmidinger@xxxxxxx> To: <vdr@xxxxxxxxxxx> Sent: Thursday, October 29, 2009 1:13 AM Subject: Re: Restricting a particular dvb card from tuning to channels with a selected modulation > On 10/28/09 23:15, Petri Helin wrote: > > Hi, > > > > I have an USB DVB-C card (Reddo dvb-c, actually a relabelled Tongshi > > box), which works very well with the current Linux driver excluding > > channels with QAM-256 modulation. Would it be easy to check > > FE_CAN_QAM_256 in vdr before trying to use a device to tune to a > > particular channel? In such a case I could deactivate FE_CAN_QAM_256 in > > the drivers. I am using VDR 1.7.9, if it makes a difference. > > Checking the frontend capabilities is certainly the right thing to do, > and I will see that this gets implemented. > > Klaus > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
