> -----Ursprungligt meddelande----- > Från: vdr-bounces@xxxxxxxxxxx [mailto:vdr-bounces@xxxxxxxxxxx] För Theunis > Potgieter > Skickat: den 15 oktober 2009 10:28 > Till: VDR Mailing List > Ämne: Setup more than 4 tuners to the same satellite > > I currently have a twin LNB on a single dish. I have read through some > old threads but could not find what I was looking for. I need some > advice on how to setup more than 4 tuners ( example 6 ) to see the > same satellite with the same dish. I can only change the LNB and add > cables and/or multiswitch/diseq. > > I did read http://www.linuxtv.org/wiki/index.php/Sat_antenna > > But I'm still not sure what I should get > > Should I get a 8x8 LNB ( http://www.ellies.co.za/index.php?id=548 ) > and each card plugs in directly to this LNB? > > Or do I need to get a Quad LNB ( > http://www.ellies.co.za/index.php?id=547 ) and add to that a > multiswitch/diseq type ( http://www.ellies.co.za/index.php?id=795 ) ? > > Or should I keep my existing TwinLNB and simply add this > http://www.ellies.co.za/index.php?id=796 ? > > Thanks for any advice in advance. > Theunis > > _______________________________________________ Hi. What you want is a "Quattro" LNB and a 4-to-8 (or 5-8) Multiswitch, not a quad LNB. Then you can use up to eight independently operating tuners. /Magnus H _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
