Hello. I have a vdr host with 1 DVB-s FF card and 3 DVB-s USB devices and 3 DVB-t USB devices. When I have 2 concurrent DVB-s recordings at different transponders, these are done at different DVB-s USB devices and there is no problem, but if I have 2 concurrent recordings at the same transponder, I get lots of: Sep 24 16:27:39 vdr vdr: [20650] 2 cRepacker messages suppressed Sep 24 16:27:39 vdr vdr: [20650] cAudioRepacker(0xC1): skipped 572 bytes while syncing on next audio frame Sep 24 16:27:39 vdr vdr: [20650] 3 cRepacker messages suppressed Sep 24 16:27:39 vdr vdr: [20650] cAudioRepacker(0xC0): skipped 1148 bytes while syncing on next audio frame and scrambled data. As a first workaround / test setup I would like to limit vdr to do at most one recording per device and chose a new device even if a second recording is at the same transponder. Most suitably this shall apply one to specific devices or channels, if possible. How could this be achieved? Thank you. _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr