> > honestly - I don't know because the dish is on the roof of my home - I don't have access to it currently > > OK, that makes debugging more complicated. I connected the ampermeter for measure the current in dish cable and found out that no any problem with software - when I are moving between satellite the current is arising from 120 ma to 200-300 ma. But I don't have lock. I suppose that my dish installed not so correctly - that's why I should play with altitude and latitude. I will do. > > have you ideas about how can I see in the log the disecs commands from vdr to dish ? > > I don't know of logging but it should be with your diseqc.conf as simple > as: > > tone on/off > voltage 13/18 > E0 > 10 > 38 > xx > wait 150 ms > G becomes > voltage 18 > tone off > wait 20ms > EO > 31 > 6E > yy > zz > if repeated > wait 20 ms > E1 > 31 > 6E > yy > zz > wait dish turn for 100 ms ... 100s (e.g.) > tone on/off > voltage 13/18 > > Did you have this working with some other vdr setup or set to box? no, I have only these logs Aug 22 20:21:19 arvdr vdr: [3218] DiSEqC GotoX -192 (35008) -> -360 (35176), wait time 1.7s Aug 22 20:21:22 arvdr vdr: [3218] DiSEqC GotoX done. Aug 22 20:21:27 arvdr vdr: [3195] warning: Moving dish to 19.2E - 1s Aug 22 20:21:29 arvdr vdr: [3195] warning: Moving dish to 36.0E - 1s Aug 22 20:21:31 arvdr vdr: [3218] frontend 0 timed out while tuning to channel 13, tp 112303 Aug 22 20:21:36 arvdr vdr: [3195] switching to channel 14 Goga _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
