Am Mittwoch, den 15.07.2009, 11:21 +0200 schrieb Thomas Netousek: > ich kenn mich zwar nicht aus und darum poste ich es auch nicht auf der mailingliste, aber > > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. > > sagt mir, dass einmal Strom abschalten bei der TT helfen koennte ?! Glaub mir, das habe ich als erstes probiert. Der Fehler kommt immer, egal, ob die Box warm- oder kalt gestartet wurde. Aber trotzdem Danke für den Hinweis. > > Thomas > > > > Falk Spitzberg wrote: > > Hello, > > > > i am lost with my TT Connect S2-3600. It used to work, but after a > > teporary switch to kernel 2.6.30 i can't get it up anymore. > > > > I am back on kernel 2.6.27.23 (SuSE) and the S2-Liplianin driver > > package. All modules built fine and are installed correctly. A > > FullFeatured card that is also there, works without problems. > > > > When i connect the USB box, it get the following error: > > > > usb 3-5: new high speed USB device using ehci_hcd and address 2 > > usb 3-5: configuration #1 chosen from 1 choice > > usb 3-5: New USB device found, idVendor=0b48, idProduct=3007 > > usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > > usb 3-5: Product: TT-USB2.0 > > usb 3-5: Manufacturer: TechnoTrend > > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. > > pctv452e_power_ctrl: 1 > > dvb-usb: will pass the complete MPEG2 transport stream to the software > > demuxer. > > DVB: registering new adapter (Technotrend TT Connect S2-3600) > > pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. > > dvb-usb: MAC address: ffff88013657b0d0 > > pctv452e_frontend_attach Enter > > BUG: unable to handle kernel NULL pointer dereference at > > 0000000000000000 > > IP: [<ffffffff8049b393>] __mutex_lock_slowpath+0x34/0xa2 > > PGD 132d59067 PUD 1365b8067 PMD 0 > > Oops: 0002 [1] SMP > > last sysfs > > file: /sys/devices/pci0000:00/0000:00:1d.7/usb3/3-5/bmAttributes > > CPU 0 > > Modules linked in: stb0899(N) dvb_usb_pctv452e(N+) dvb_usb(N) > > lirc_serial(N) lir > > c_dev(N) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device tun hdshm(N) > > af_packet > > ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave > > acpi_cpufreq fuse > > loop dm_mod tda8083(N) stv0299(N) ves1x93(N) dvb_ttpci(N) dvb_core(N) > > saa7146_v > > v(N) videodev(N) v4l1_compat(N) v4l2_compat_ioctl32(N) saa7146(N) > > snd_hda_intel > > videobuf_dma_sg(N) videobuf_core(N) snd_pcm snd_timer ttpci_eeprom(N) > > snd_page_a > > lloc snd_hwdep i2c_i801 snd ohci1394 e1000e button soundcore i2c_core > > ieee1394 r > > tc_cmos pcspkr intel_agp rtc_core sr_mod rtc_lib cdrom sg uhci_hcd > > ehci_hcd sd_m > > od crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ide_core > > ata_gene > > ric ahci pata_jmicron libata scsi_mod dock thermal processor thermal_sys > > hwmon > > Supported: No > > Pid: 3994, comm: modprobe Tainted: G 2.6.27.23-0.1-default #1 > > RIP: 0010:[<ffffffff8049b393>] [<ffffffff8049b393>] > > __mutex_lock_slowpath+0x34/ > > 0xa2 > > RSP: 0018:ffff880132ca9b90 EFLAGS: 00010246 > > RAX: 0000000000000000 RBX: ffffffffa03d9708 RCX: 0000000000000002 > > RDX: 0000000000000000 RSI: ffff880132ca9c18 RDI: ffffffffa03d970c > > RBP: ffffffffa03d970c R08: ffff880132ca9ca7 R09: 0000000000000001 > > R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801385fa740 > > R13: ffffffffa03d9710 R14: ffffffffa03d96d0 R15: 0000000000000000 > > FS: 00007f7b741746f0(0000) GS:ffffffff80a40080(0000) > > knlGS:0000000000000000 > > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > > CR2: 0000000000000000 CR3: 000000013a16f000 CR4: 00000000000006e0 > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > Process modprobe (pid: 3994, threadinfo ffff880132ca8000, task > > ffff8801385fa740) > > Stack: ffffffffa03d9710 ffff880132ca9cc8 0000000000000000 > > ffffffffa03d79f0 > > ffff880132ca9ca7 ffffffffa03d96d0 0000000000000002 ffff880132ca9c18 > > ffffffffa03d96d0 ffffffff8049b33f ffffffffa0190519 0000000000000000 > > Call Trace: > > [<ffffffff8049b33f>] mutex_lock+0xa/0xb > > [<ffffffffa0190519>] i2c_transfer+0x56/0xd1 [i2c_core] > > [<ffffffffa03d6252>] i2c_read+0x48/0x67 [stb0899] > > [<ffffffffa03d62bf>] Read8Direct+0x4e/0x99 [stb0899] > > [<ffffffffa03d7569>] stb0899_attach+0x139/0x348 [stb0899] > > [<ffffffffa03cfa3a>] pctv452e_frontend_attach+0x5e/0x206 > > [dvb_usb_pctv452e] > > [<ffffffffa03c8e94>] dvb_usb_adapter_frontend_init+0x33/0xf5 [dvb_usb] > > [<ffffffffa03c89ab>] dvb_usb_device_init+0x4de/0x5c7 [dvb_usb] > > [<ffffffffa00f78e0>] usb_probe_interface+0x1a8/0x1df [usbcore] > > [<ffffffff803e65b7>] really_probe+0xdd/0x1e5 > > [<ffffffff803e67a4>] __driver_attach+0x46/0x6d > > [<ffffffff803e5d82>] bus_for_each_dev+0x44/0x78 > > [<ffffffff803e5686>] bus_add_driver+0xf4/0x224 > > [<ffffffff803e6962>] driver_register+0x9c/0x103 > > [<ffffffffa00f7af7>] usb_register_driver+0x7e/0xe0 [usbcore] > > [<ffffffffa019a01b>] pctv452e_usb_init+0x1b/0x5c [dvb_usb_pctv452e] > > [<ffffffff80209041>] _stext+0x41/0x110 > > [<ffffffff80260f76>] sys_init_module+0xa0/0x1ba > > [<ffffffff8020bfbb>] system_call_fastpath+0x16/0x1b > > [<00007f7b73cfa76a>] 0x7f7b73cfa76a > > > > Code: 6f 04 53 48 89 fb 48 89 ef 4c 8d 6b 08 48 83 ec 20 65 4c 8b 24 25 > > 00 00 00 > > 00 e8 03 0d 00 00 48 8b 53 10 4c 89 2c 24 48 89 63 10 <48> 89 22 48 89 > > 54 24 08 > > 48 83 ca ff 4c 89 64 24 10 48 89 d0 87 > > RIP [<ffffffff8049b393>] __mutex_lock_slowpath+0x34/0xa2 > > RSP <ffff880132ca9b90> > > CR2: 0000000000000000 > > ---[ end trace 2a7a22f5799b2d7c ]--- > > usb 3-5: USB disconnect, address 2 > > > > > > Any ideas? > > > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr -- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post@xxxxxxxxxxxx _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
