I am still waiting for anyone to help on this. If you have a known working vdr2dvd.sh that works with projectX could you please make it available. Or if you have one that works with vdrsync I can use that too. Thank you in advance, ----- Original Message ----- From: "hu_emulator" <hu_emulator@xxxxxxxxxxx> To: "VDR Mailing List" <vdr@xxxxxxxxxxx> Sent: Sunday, June 28, 2009 9:32 AM Subject: Re: vdrconvert-vdr-1.7.0+ > Heres my final errors: > > -> add frames > Audio PTS: first packet 06:58:29.361, last packet 08:42:03.105 > Video PTS: start 1.GOP 06:58:29.768, end last GOP 08:37:00.640 > -> adjusting audio at video-timeline > -> src_audio: MPEG-1, Layer2, 48000Hz, stereo, 160kbps, noCRC @ > 00:00:00.000 > ^M2 %^M3 %^M4 %^M5 %^M6 %^M7 %^M8 %^M9 %^M10 %^M11 %^M12 %^M13 %^M14 %^M15 > %^M16 %^M17 %^M18 %^M19 %^M20 %^M21 %^M22 %^M23 %^M24 %^M25 %^M26 %^M27 > %^M28$ > ---> new File: > '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa' > > summary of created media files: > Video (m2v): 209 Frames 00:00:06.970 > '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpv' > Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 > '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpa' > Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 > '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa' > => 1,123,980 bytes written... > -> we have 3687 warnings/errors. > done... 1 collection(s) processed @ 00:01:43.382 > > Enter do_transcode > Enter do_prepare_titelmenu > Enter do_mplex > ERROR : Keine Audiospuren > NOTICE : exit! > Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : > 28-06-2009 09:20:47 : Session /usr/local/bin/vdr2dvd.sh Exit > > Any suggestions? > > Thanks, > ----- Original Message ----- > From: "Falk Spitzberg" <post@xxxxxxxxxxxx> > To: "VDR Mailing List" <vdr@xxxxxxxxxxx> > Sent: Friday, June 26, 2009 4:19 AM > Subject: Re: vdrconvert-vdr-1.7.0+ > > >> Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg: >>> Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser: >>> > I have also tested your patch with vdrconvert-0.2.0 but with a few >>> > Extensions in vdr2dvd.sh. >>> > >>> > The final error message in vdr2dvd.log says, that no audio traces >>> > exists. >>> >>> >>> Oops, i compared my hacked version with the wrong file. >>> >>> Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1 >>> >>> My hack assumes that you are using ProjectX. >>> >>> Sorry for the confusion! >>> >>> Falk >>> >> >> Diff file attached >>> >>> > >>> > >>> > > Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator: >>> > > > I edited your changes and when I run vdrconvert with the new >>> > > > vdr2dvd.sh it >>> > > > errors out. Could you post or make available your vdr2dvd.sh? >>> > > >>> > > What kind of error do you get? >>> > _______________________________________________ >>> > vdr mailing list >>> > vdr@xxxxxxxxxxx >>> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >>> >>> >>> >>> _______________________________________________ >>> vdr mailing list >>> vdr@xxxxxxxxxxx >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> -- >> Falk Spitzberg >> Tel: +49 5242 901626 >> E-Mail: post@xxxxxxxxxxxx >> > > > -------------------------------------------------------------------------------- > > >> _______________________________________________ >> vdr mailing list >> vdr@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
