Date: Sun, 7 Jun 2009 19:30:34 +0200 From: Gerald Dachs <vdr@xxxxxxxxxxx> Subject: Re: repeat vol key To: vdr@xxxxxxxxxxx Message-ID: <20090607193034.5ef1f902@master> Content-Type: text/plain; charset=US-ASCII I use the remote that comes with the Hauppagge S2-HD (and hence connected to the card itself) lirc connects to this remote vi/dev/input/by-path/pci-0000:01:0a.0--event-ir This is part of my /etc/lircd.conf name NOVA-HD-S2 bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x1 gap 199999 min_repeat 1 toggle_bit 1 Am Sun, 7 Jun 2009 19:01:00 +0200 schrieb martinez@xxxxxxx: in /etc/vdr/remote.conf I have (among others) these two entries: LIRC.Volume+ VolumeUp LIRC.Volume- VolumeDown My wife complains that to increase the volume she has to press many times VolumeUp rather than simply hold it down. Is there something I can do to make her happy? Recently I have read about some simple USB IR receivers that don't send the toggle bit that lirc needs to recognize the hold of a button. I suppose you use one of them, because normally it works like your wife expects. So I believe you should exchange the IR receiver. _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
