> >> And which parameters are the wrong ones?
> >
> >
> > these two parameters are wrong
> >
> > Frequency: 18437984 (= 11.95760 GHz) - should be another freq = 12.380
> > Kind: 0 (0x00) [= DVB-S] - should be dvb-s2
> >
> > also, no any information about roll off factor, that's why vdr substituted roll off = auto , cx24116 based cards don't
> > understand roll off = auto.
> >
> > Goga
> >
> >
> > fixed ('00'): 0 (0x00)
> > Modulation_type: 2 (0x02) [= 8PSK]
> > Symbol_rate: 2506752 (= 26.4000)
> > FEC_inner: 2 (0x02) [= 2/3 conv. code rate]
>
> Well, if VDR is told this is a DVB-S transponder, while in fact it is
> DVB-S2, I'm afraid there's nothing it can do about that.
>
> Have you tried complaining to the provider?
yes, sure.
Answer from provider - "please use our official receivers"
@klaus
could you change VDR behaviour if in the NIT the rolloff is missing - is it possible to substitute roll off = 35 instead
of roll off = auto ?
Goga
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
