I've get it from http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=497-8347-1-ND About the oszilloscope and signals, sorry but I don't know... Hope that you will fix your card soon, cedo ----- Original Message ---- From: Patrick Maier <maierp@xxxxxxxxxxxxxxxxxxxxxxxxx> To: VDR Mailing List <vdr@xxxxxxxxxxx> Sent: Friday, February 13, 2009 11:36:28 AM Subject: Re: Use FF Card only as output device Hi, >I and some of my friends had same problem with ff card (rev.1.3) after 5-6 >years. > And replaced LNBP chip (located near bigest capacitor), now everything > work as used to be. > Total cost of repair was 10 euros ;) Ah cool. I've also a rev. 1.3 so I will try to do the same :-) Can you give me the part-number of that chip. Where did you get it? So This is the power supply for the LNB and creates the different voltages and frequencies telling which band and H/V is required. Can I test the actual output with an oszilloscope? You know which signals must be there when in low/high-band and H/V? Greets and thank you Patrick _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
