Hi I have tried to add some more printouts to dvbdevice.c for trying to understand why the vdr-1.7.x fails to tune to dvb-s or dvb-s2 channels. hvr-1300 is in /dev/dvb/adapter0 and hvr-4000 is in /dev/dvb/adapter1 I added printouts to SetFrontEnd() and Action() methods. In SetFrontEnd() method it seems that the code is at least always going to correct if/else block. (No, diseq, dvb-t, dvb-s or dvb-s2 depending on what channel I try to tune) If I watch dvb-t channel (which works), I can see a following logs: Action(): cardIndex: 0, tunerStatus: 1, NewStatus: 0 SetFrontEnd(): DVB-T, fd_frontend: 4, cardIndex: 0 Action(): cardIndex: 0, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 0, tunerStatus: 2, NewStatus: 1 ... Action(): cardIndex: 0, tunerStatus: 2, NewStatus: 31 frontend 0 regained lock on channel 1, tp 546 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 3, NewStatus: 31 frontend 0 regained lock on channel 1, tp 546 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 3, NewStatus: 31 frontend 0 regained lock on channel 1, tp 546 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 3, NewStatus: 31 ... If I instead try to tune to new dvb-s channel that I have not previously pre-tuned with szap or szap-s2 (for example arte), vdr will fail to show the channel and I can see a following: Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 1, tunerStatus: 1, NewStatus: 31 Setup.DiSeqC == false SetFrontEnd(): DVB-S, fd_frontend: 6, cardIndex: 1 (frequency * 1000UL): 993000 channel.Modulation(): 9 channek.Srate() * 1000UL): 22000000 channel.CoderateH(): 5 channel.Inversion(): 2 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 3 frontend 1 lost lock on channel 5, tp 110743 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 ... If I have pre-tuned for example to same arte with szap-s2, then vdr is able to show that channel, and I get a following output: Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 1, NewStatus: 3 Setup.DiSeqC == false Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 SetFrontEnd(): DVB-S, fd_frontend: 6, cardIndex: 1 (frequency * 1000UL): 993000 channel.Modulation(): 9 channek.Srate() * 1000UL): 22000000 channel.CoderateH(): 5 channel.Inversion(): 2 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 ... I have following in my channel conf for dvb-t and dvb-s channels: YLE TV1;YLE:546000:B8C23G8M64T8Y0:T:27500:512=2:650=fin:2321:0:17:8438:4097:0 arte;ARD:10743:hC56M5O0S0:S19.2E:22000:401=2:402=deu,403=fra:404:0:28724:1:1051:0 Klaus, do you have any idea from which functions I should try to track more for finding the problem? Mika _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
