Hello, it took me some time to find out that my HVR-4000 don't work for DVB-S(2) with vdr-1.7.2. v4l-dvb gives this when I start the modules : saa7146: register extension 'budget_ci dvb'. budget_ci dvb 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 saa7146: found saa7146 @ mem ffffc20000f96c00 (revision 1, irq 21) (0x13c2,0x100f). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI) adapter has MAC addr = 00:d0:5c:23:a3:9b input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/input/input13 DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... Linux video capture interface: v2.00 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded cx8800 0000:04:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2 cx88[0]: TV tuner type 63, Radio tuner type -1 cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner tuner' 8-0043: chip found @ 0x86 (cx88[0]) tda9887 8-0043: creating new instance tda9887 8-0043: tda988[5/6/7] found tuner' 8-0061: chip found @ 0xc2 (cx88[0]) tuner' 8-0063: chip found @ 0xc6 (cx88[0]) tveeprom 8-0050: Hauppauge model 69009, rev B2A0, serial# 1241151 tveeprom 8-0050: MAC address is 00-0D-FE-12-F0-3F tveeprom 8-0050: tuner model is Philips FMD1216ME (idx 100, type 63) tveeprom 8-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 8-0050: audio processor is CX882 (idx 33) tveeprom 8-0050: decoder processor is CX882 (idx 25) tveeprom 8-0050: has radio, has IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=69009 tuner-simple 8-0061: creating new instance tuner-simple 8-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:04:02.0/input/input14 cx88[0]/0: found at 0000:04:02.0, rev: 5, irq: 23, latency: 64, mmio: 0xdb000000 wm8775' 8-001b: chip found @ 0x36 (cx88[0]) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx8800 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[1]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected], frontend(s): 1 cx88[1]: TV tuner type 4, Radio tuner type -1 cx88[1]/0: found at 0000:04:05.0, rev: 3, irq: 20, latency: 64, mmio: 0xd9000000 cx88[1]/0: registered device video1 [v4l2] cx88[1]/0: registered device vbi1 cx2388x alsa driver version 0.0.6 loaded cx88_audio 0000:04:02.1: PCI INT A -> GSI 23 (level, low) -> IRQ 23 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:04:02.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 cx88[0]/2: found at 0000:04:02.2, rev: 5, irq: 23, latency: 64, mmio: 0xdd000000 cx8802_probe() allocating 2 frontend(s) cx88[1]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:04:05.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[1]/2: found at 0000:04:05.2, rev: 3, irq: 20, latency: 64, mmio: 0xda000000 cx8802_probe() allocating 1 frontend(s) cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68] cx88[0]/2: cx2388x based DVB/ATSC card tuner-simple 8-0061: attaching existing instance tuner-simple 8-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) DVB: registering new adapter (cx88[0]) DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)... DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)... cx88[1]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52] cx88[1]/2: cx2388x based DVB/ATSC card CX24123: detected CX24123 DVB: registering new adapter (cx88[1]) DVB: registering adapter 2 frontend 0 (Conexant CX24123/CX24109)... The problem is certainly in : DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)... DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)... The card tune well for example with kaffeine to BBC HD. Any idea on how to use it with VDR (dvb-t is of second interest to me) ? -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
