Re: [PATCH] S2API for vdr-1.7.0(1.7.1) quick hack

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



В сообщении от 30 September 2008 09:08:59 Niels Wagenaar написал(а):> Op Zo, 28 september, 2008 23:29, schreef gimli:> > Hi,> >> > I'm on Astra 19.2 and tested the following HD transponders :> > Anixe HD> > Arte HD> > Astra HD+> >> > first test results :> >> > Arte HD tunes ok and plays fine.>> Same here. Arte HD is a DVB-S2 transponder using the 8PSK modulation.> Locking goes without any problems at all.>> > On Astra HD+ and Anixe HD im getting an error :>> Astra HD+ en Anixe HD is on a DVB-S2 transponder which is using a QPSK> modulation.>> > -- SNIP --> >> > If you need further informations let me know.>> I tested other DVB-S2 transponders which have a QPSK modulation. All these> didn't want to lock and gave a timeout. DVB-S2 Transponders with a 8PSK> modulation did gave a lock (Hotbird has a couple, while I don't have> subscriptions to chose channels, I'm able to lock those).>> So my first impression was, it's a missing parameter in the Frontend> struct. So I made some changes and check if the transponder is DVB-S2 and> added parameters for DTV_PILOT (with data PILOT_AUTO) and when QPSK is> used with DVB-S2, to use the NBC_QPSK modulation (which is needed for> DVB-S2 if I'm not mistaken) instead of regular QPSK.>> However, didn't bring me the sollution I hoped for. I now have a timeout,> lost lock and regain lock, etc, etc, etc. But it's more then it was> before.>> So I'm close. Currently I do have a small problem where I put in> parameters which shouldn't been given (oops!) and now my DVB-card doesn't> lock any more, I need to reboot first.>> I hope to start to work on it this further when I'm done with work. I'll> keep you all posted :)>> BTW, I did manage to get DVB-T working. At least it locks on on the> encrypted channels, but I didn't had time to check for image. Mainly since> DVB-T is my backup for channel-viewing and I wanted to focus on the DVB-S2> problem.>> > cu> >> > Edgar (gimli) Hucek>> Regards,>> Niels Wagenaar
May I ask you, Niels or Edgar, would you try szap-s2 with parameter -M3, which means NBC_QPSK modulation. It is interesting for me, whether it works. i'm not able to receive Astra HD+ and Anixe HD.
Best Regards Igor M. Liplianin
_______________________________________________vdr mailing listvdr@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[Index of Archives]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Big List of Linux Books]     [Fedora Users]     [Fedora Women]     [ALSA Devel]     [Linux USB]

  Powered by Linux