В сообщении от 29 September 2008 00:29:17 gimli написал(а):> Hi,>> I'm on Astra 19.2 and tested the following HD transponders :> Anixe HD> Arte HD> Astra HD+>> first test results :>> Arte HD tunes ok and plays fine.>> On Astra HD+ and Anixe HD im getting an error :>> Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() FE_SET_PROPERTY> Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.num = 8> Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.props => 0000000041b31dc0> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000011> (DTV_DELIVERY_SYSTEM)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000005> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000003> (DTV_FREQUENCY)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00140cd0> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000004> (DTV_MODULATION)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000008> (DTV_SYMBOL_RATE)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x01a39de0> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000009> (DTV_INNER_FEC)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x0000000b> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000006> (DTV_INVERSION)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x0000000d> (DTV_ROLLOFF)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002> Sep 28 23:27:28 archvdr dtv_property_process_set()> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000001> (DTV_TUNE)> Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000> Sep 28 23:27:28 archvdr dtv_property_process_set() Finalised property cache> Sep 28 23:27:28 archvdr dtv_property_cache_submit()> Sep 28 23:27:28 archvdr dtv_property_cache_submit() adv, modulation = 0> Sep 28 23:27:28 archvdr dtv_property_adv_params_sync()> Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() Property cache is> full, tuning>> If you need further informations let me know.>> cu>> Edgar (gimli) Hucek>> > В сообщении от 28 September 2008 17:12:14 Niels Wagenaar написал(а):> >> Hi Igor,> >>> >> Small question. I tried your patch, but it fails a hunk in dvbdevice.c.> >> I> >> added this hunk manually but I think something is missing:> >>> >> Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not> >> supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252):> >> Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR:> >> frontend> >> 0: Invalid argument> >>> >> Those both lines has the following code:> >>> >> CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt));> >> CHECK(ioctl(fd_frontend,> >> FE_SET_TONE, tone));> >>> >> The result is, no tuning and no picture.> >>> >> And to be honest, I don't really understand why it shouldn't work.> >> Mainly,> >> since the same code is used with the Kaffeine patch (I'm comparing that> >> also).> >>> >> Any help is appreciated :) If you need a quick chat, I'm currently in> >> #linuxtv on irc.freenode.net :)> >>> >> Regards,> >>> >> Niels Wagenaar> >>> >> > -----Oorspronkelijk bericht-----> >> > Van: Igor M. Liplianin [mailto:liplianin@xxxxxx]> >> > Verzonden: zondag 28 september 2008 12:49> >> > Aan: vdr@xxxxxxxxxxx; Niels Wagenaar> >> > CC: Gregoire Favre; linux-dvb@xxxxxxxxxxx> >> > Onderwerp: [PATCH] S2API for vdr-1.7.0(1.7.1) quick hack> >> >> >> > ? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?):> >> > > Hello all (and especially Klaus):> >> > >> >> > > It's official, the people from V4L have voted for the usage of the> >> > > S2API proposal to be the future for new DVB API improvements (see> >> > > the official announcement at the bottom) within the V4L tree.> >> > > Currently S2API is in a real speed-train and new devices are added> >> > > very> >> >> >> > rapidly.> >> >> >> > > Only the devices currently in Multiproto and written by Manu Abraham> >> >> >> > are not yet ported.> >> >> >> > > Also people are allready busy with patches for Kaffeine (allready> >> > > done) and MythTV (not seen yet, but it's WIP according to a post on> >> > > the linux-dvb mailinglist).> >> > >> >> > > So, this should mean that VDR 1.7.x should focus on S2API because of> >> > > the obvious reasons. Has anybody started on a patch of somekind to> >> > > include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing> >> >> >> > it> >> >> >> > > myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready> >> > > supported in S2API) in the hope to have it working in the next> >> > > weekend. But if it's allready done or in progress, then I would like> >> > > to use my time for something else ;)> >> > >> >> > > Regards,> >> > >> >> > > Niels Wagenaar> >> >> >> > Hi Niels> >> >> >> > S2API for vdr-1.7.0(1.7.1) quick hack> >> > Patch is ugly and only supported DVB-S. But it is useful to begin.> >> > You may modify it like you wish.> >> >> >> > Igor> >>> >> _______________________________________________> >> vdr mailing list> >> vdr@xxxxxxxxxxx> >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr> >> > V.2> > Only satellite, as I have not any cable or terrestrial, but it is easy to> > modify :-)> > I test it with cx24116 based card (though without ISL chip) and didn't> > find> > any troubles.> >> > Igor> > _______________________________________________> > vdr mailing list> > vdr@xxxxxxxxxxx> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>> _______________________________________________> vdr mailing list> vdr@xxxxxxxxxxx> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr BTW, did you put actual(ones from your actual repository, from wich drivers was compiled, for example s2/linux/include/linux/dvb) dvb headers in /usr/include/linux/dvb from before compiling VDR ?You can see onhttp://linuxtv.org/hg/~stoth/s2that headers was changed 25 Sep -- Igor M. Liplianin _______________________________________________vdr mailing listvdr@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
