Op Wo, 17 september, 2008 08:04, schreef Matthias Fechner: > Hi Community, > > -- SNIP -- > > Was anyone successfull to get that driver with VDR 1.7.1 with the old TT > card (Rev 1.3) running? Not with an old TT card and VDR 1.7.1, but I had the same kind of problem with a Skystar2 (SS2) Rev 2.6 in combination with VDR 1.7.0 a couple of days back. I used Igor's repo as well and I only compiled VDR against the liplianindvb with the compiler.h in place (no compiling of liplianindvb at all, I thought it wasn't needed since the card was allready detected). And I encountered the same problem, no locking with VDR 1.7.0 and a SS2. In the user.log I found an error message with the text "No DVB devices found" (or something like this). I resolved it by compiling liplianindvb and do a make install (I rebooted to be sure). And voila! The SS2 worked without problems and could lock to several transponders on different sats. So in short, compilation and installation of multiproto is mandatory for VDR 1.7.0. Perhaps this will also fix your problem with VDR 1.7.1. > Bye, > Matthias Regards, Niels Wagenaar _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
