________________________________________ Van: vdr-bounces@xxxxxxxxxxx [vdr-bounces@xxxxxxxxxxx] namens Hawes, Mark [MARK.HAWES@xxxxxxxxxxxxxx] Verzonden: vrijdag 22 augustus 2008 13:05 Aan: vdr@xxxxxxxxxxx Onderwerp: iptv plugin - hardware scaling Hi, I’m using iptv 0.2.1 with vdr 0.1.7 to view NASA TV on a technotrend ff card. The displayed picture occupies only the top left ¼ of the screen. My objective is to get it full screen. I have tried scaling it in the iptvscreen.sh script in the vlc call but this asks too much of the processor and things get very jerky. I believe that the ff card is capable of scaling in hardware. Any idea how I can get it to do this for an iptv stream? Thanks, Mark. This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is confidential to the ordinary user of the email address to which it was addressed and may contain copyright and/or legally privileged information. No one else may read, print, store, copy or forward all or any of it or its attachments. If you receive this email in error, please return to sender. Thank you. If you do not wish to receive commercial email messages from Fujitsu Australia Limited, please email unsubscribe@xxxxxxxxxxxxxx Op deze e-mail zijn de volgende voorwaarden van toepassing: http://www.fontys.nl/disclaimer The above disclaimer applies to this e-mail message. _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
