Wolfgang Fritz wrote:
> Artur Skawina schrieb:
>> sure, patch vs 2.6.25 below. These are just the minimal changes needed to make
>> ati-remote work w/ one type of medion rf remotes (P/N 20018071). i did this
>
> Mine is P/N 20014751
afaict it looks exactly like the one i'm using.
>> The keymap for medion remotes is different from the one for ati, but as i'm
>> currently using mine just for vdr i never needed to fix this up (vdr does its
>> own mapping anyway).
>
> I have added an additional table for Medion (selected by product ID),
> but this might not work if the different Medion types have the same
> product ID.
I have at least four different types of medion remotes, each with a different
layout and features; they all work w/ the same receiver so selecting based on
usb ids won't work. I don't remember if the keymaps were incompatible though.
In any case, i'm assuming the ati remote will work w/ a medion receiver and v/v...
A per-channel module parameter is probably required.
>> + /*
>> + * Some remotes alternate codes, this makes it easier to detect autorepeat;
>> + * to keep things simple we simply "undo" the code change here.
>> + */
>> + if (d2 & 0x80) {
>> + d1 += 0x80;
>> + d2 -= 0x80;
>> + }
>
> Interesting. I have to check if my Medion needs this. Autorepeat is
> working OK but my solution is more complicated than yours, and this
> might be the reason.
well, the key code changes could be used to distinguish autorepeat from a
repeated keypress, but i found the autorepeat rate to be high enough
(for a remote) and just ignore them, as above.
artur
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
